12 oz SUBLIMATION white straight sippy cup insulated tumbler. — Bulk Tumblers
Finally! A straight sided sublimation sippy cup with a screw-on lid! Silicone lid insert helps prevent spills, and straight sides make the most of your design! USING A MUG PRESS:Note: The recommended settings above may need adjustments for best results.Settings will vary depending on the mug press brand and model in
Finally! A straight sided sublimation sippy cup with a screw-on lid! Silicone lid insert helps prevent spills, and straight sides make the most of your design!
USING A MUG PRESS:
Note: The recommended settings above may need adjustments for best results.
Settings will vary depending on the mug press brand and model ink and paper
and atmospheric conditions.
2nd Note: Settings are based on a GKDK3 mug press by George Knight.
3rd Note: Be sure that the artwork does not go beyond the size limits of the
mug press.
Supplies needed:
- sublimatable substrate (mug)
- sublimation transfer
- scratch paper
- heat tape
Mug heat press settings:
- temperature - 380 degrees F
- dwell time - 1:00 to 1:15 minutes
- pressure - light to medium
Steps:
1. cut your transfers so that the transfer is slightly larger vertically than
the mug.
2. Position the substrate onto the transfer.
3. Tape two ends of the transfer near the handle of the mug using the heat
tape.
4. Wrap a piece of scratch paper around the transfer and mug taping if
necessary.
5. Center the transfer and mug in the mug press.
6. Close the mug press using the mug heat press settings above.
7. Remove items from the press immediately. Use heat resistant gloves if
necessary - the items will be very hot.
8. Remove transfer and scratch paper.
Tips:
- If the image of the final product appears light increase the pressure or
the dwell time slightly (10-15 seconds).
- If the image on the final product appears blurred or substrate appears
yellowed or has brown spots on the rim of the top or bottom of the mug reduce
the dwell time slightly (10-15 seconds).
- Too much pressure can cause trapped moisture in the paper to jet away
pulling ink with it in a spiked-peaked formation. To avoid this reduce the
pressure.
USING A WRAP AND A CONVECTION OVEN:
Note: The recommended settings above may need adjustments for best
results. Settings will vary depending on the oven brand and model ink and
paper and atmospheric conditions.
Supplies needed:
- sublimatable substrate (mug)
- wrap
- sublimation transfer
- scratch paper
- heat tape
Mug heat press settings:
- temperature - 400 degrees F
- dwell time - 4:00 - 4:30 minutes
Steps:
1. cut your transfers so that the transfer is slightly larger vertically than
the mug.
2. Position the substrate onto the transfer.
3. Tape two ends of the transfer near the handle of the mug using the heat
tape.
4. Wrap a piece of scratch paper around the transfer and mug taping if
necessary.
5. Place the wrap onto the mug and snap closed.
6. Place in oven and use the settings above.
7. Remove items from the oven and remove wrap transfer and scratch paper. Use
heat resistant gloves if necessary - the items will be very hot.
Tips:
- If the image of the final product appears light increase the pressure or
the dwell time slightly (10-15 seconds).
- If the image on the final product appears blurred or substrate appears
yellowed or has brown spots on the rim of the top or bottom of the mug reduce
the dwell time slightly (10-15 seconds).
12oz Tumbler Sublimation Blanks Sippy Bottle Stainless Steel Wholesale Baby Vacuum & Straight Cup – Tumblerbulk
10 Pack 12 Oz Sippy Cup Tumbler for Sublimation. Set of 10. Sublimation Blanks. Straight Non-tapered Sippy Cup
12oz Tumbler Sublimation Blanks Sippy Bottle Stainless Steel Wholesale Baby Vacuum & Straight Cup – Tumblerbulk
High-Quality Coating: Mocaru kids sippy cups come with sublimation coating process, you can design beautiful cartoon patterns on the mugs, bright
Mocaru Sublimation Kids Sippy Cup, 12oz Stainless Steel Insulated Toddler Water Bottle with Leak-Proof Straw Lid and Handle, Children Sublimation
You Will Get: this package comes with 12 pieces of kids sublimation cups with straws and replacement lids, 2 rolls of heat tapes, 12 pieces of polymer
12 Sets 12 oz Sublimation Blanks Sippy Cups for Toddlers Insulated Stainless Steel Kids Sublimation Tumbler Cups with Lids and Straws, 2 Heat Tape, 12
Sublimation Skinny Can Cooler Set: we will provide you with 20 pieces of stainless steel sippy cups for kids, with 6 pieces bottle brushes and 20
Geetery 20 Pack Sublimation Blanks Sippy Cups Bulk 12 oz White Sublimation Straight Sippy Tumblers with Handle and Lid kids Insulated Stainless Steel
12 Sets 12 oz Sublimation Blanks Sippy Cups for Toddlers Insulated Stainless Steel Kids Sublimation Tumbler Cups with Lids and Straws, 2 Heat Tape, 12 Polymer Sublimation Coating, Coaster, Brush : Baby
Sitewide Sale - Get Your Must-Haves in 2024, $120 - $6 | $200 - $12 | $280 - $20, 12 oz. Sublimation Sippy cup blanks, 2 Lids included.
12oz Stainless Steel Straight Sublimation Sippy Cup with Lids Besin
12 oz White Stainless Steel Sublimation Sippy Cup with 2 LIDS (Price p – SDN SUBLIMATION
DIY to Show Personality: you can print any figures, image, text on quality sublimation coating of blank tumbler to show your personality; Slim
24 Pack 12 oz Sublimation Blanks Tumbler Bulk Stainless Steel Straight Skinny Slim Tumblers with Lids Double Wall Vacuum Insulated Travel Mug Cups
AGH 2 Pack Sublimation Sippy Cup Blank 12 oz White Glitter Sippy Cups Sublimation Tumblers Blanks Straight Stainless Steel Bottle With Handles Straws Vacuum Insulated Leakproof Lid 2PCS-Glitter White
DIY to Show Personality: you can print any figures, image, text on quality sublimation coating of blank tumbler to show your personality; Slim
24 Pack 12 oz Sublimation Blanks Tumbler Bulk Stainless Steel Straight Skinny Slim Tumblers with Lids Double Wall Vacuum Insulated Travel Mug Cups
12oz Sublimation Sippy Cup Straight Double WallInsulated Kids Stainless Steel White Blank For Sublimation Baby Sippy Cup Tumbler
