Safe - no solvent vapors. Water cleanup & non-toxic.
Titebond White Glue is an exceptionally strong, economical white glue that sets faster than most other comparable glues. Its versatile formula is ideal for general woodworking applications, as well as many other porous and semi-porous materials. Titebond White Glue provides a strong initial tack and sets fast to reduce clamp time. It provides a translucent glue line, offers excellent sandability, and is unaffected by finishes. Titebond White Glue is easy to use, non-toxic and cleans up with water.
Fast set - Strong bond
Excellent heat-resistance
Safe - no solvent vapors
Water cleanup & non-toxic
Versatile
Dries clear and colorless
Sets faster than most other white glues
Physical Properties (Typical)
Type: Polyvinyl acetate emulsion
State: Liquid
Color: White
Dried film: Translucent
Solids: 45%
Viscosity: 7,000 cps
pH: 4.7
Calculated VOC: 10.7 g/L
Weight/gallon: 9.1 lbs.
Chalk temperature*: Approx 50°F
Flash-point: >200°F
Freeze/thaw stability: Stable
Storage life: 24 months in tightly closed containers below 70°F
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.
Application Guidelines
Application Temperature: Above 50 °F
Open assembly time: 5 minutes (70°F. / 50% RH)
Total assembly time: 10 to 15 minutes (70°F. / 50% RH)
Minimum required spread: 7 mils (typical)
Required clamping pressure: Enough to bring joints tightly together (generally 30-80 psi for High Pressure Laminate, 100-150 psi for softwoods, 125-175 psi for medium woods, and 175-250 psi for hardwoods)
Methods of application: Plastic bottles for fine applications; glue may also be spread with a roller spreader, or brush.
Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
Bonding Strength (ASTM D-905 Test with Hard Maple)
Temperature
Strength
Wood Failure
Room Temperature
3,550 psi
50%
150°F. Overnight
1,600 psi
15%
Limitations
Titebond White Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue, or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. Keep from freezing. Keep out of reach of children.
Available Sizes
Part #
Size
UPC
Case Qty.
15026
Gallon Jug
037083050264
2
5027
5 Gallon Bucket
037083050271
1
5028
55 Gallon Drum
037083050288
1
Titebond 1416 III Ultimate Wood Glue, 1-Gallon New Zealand
Adhesives & Glues – Siggia Hardware
Titebond 1416 III Ultimate Wood Glue, 1-Gallon New Zealand
White Wood Glue-1gal Titebond 15026
Titebond 1 gal. Premium Wood Glue 5006 - The Home Depot
Titebond 1 Gal White Glue - 15026
Titebond Franklin International 5005 II Premium Wood Glue, 1 Gal
Titebond 1 gal. Premium Wood Glue 5006 - The Home Depot
Non-Toxic Wood Glues & White Glues (0-VOC & Natural) - My Chemical
i.ytimg.com/vi/HiHcEGWBIzw/maxresdefault.jpg
Titebond Franklin International 5005 II Premium Wood Glue, 1 Gal
Solvent-resistant Excellent sandability Easy cleanup with water Bonds stronger than wood
Franklin International 5062 Titebond Glue, 4-Ounce
i.ytimg.com/vi/_aACv_dwrCw/sddefault.jpg
Franklin 5068, 55 Gallon Titebond Original Glue, Yellow Color