Alu-Cab’s new Tilting Fridge Slide now operates as a straight pull out slide, and it has the option to tilt. This means you have the advantage of a fridge slide that runs on stainless steel runners with sealed stainless-steel bearings. This product offers maximum strength with the ability to carry greater loads, with g
MULE Expedition Outfitters Four Wheel Camper ARB Awning Brackets
NOTE: These brackets are now STAINLESS STEEL and no longer the mild steel with black powder coat. Stainless is stronger, won't rust and no powder coat means no possibility of scratching and rusting.
We designed and manufactured these awning brackets specifically to mount an ARB 8' (ARB Part # 814410) awning to the jack brackets on slide-in style Four Wheel Campers and Project M's.
To date, they have only been tested on the Fleet and Hawk camper and only with the ARB brand awning. Several other awning brands may have similar mounting tracks but we have not tested them and cannot guarantee compatibility.
These brackets DO NOT WORK on ANY of the flatbed Four Wheel Camper.
The brackets pivot using a clamp to allow for opening and closing the roof latch and tucking in the canvas pop-top if required while closing the roof. This allows for a simple bolt-on installation with no drilling required.
The mounting kit includes:
Special Notes:
These heavy-duty jack bracket extensions are made in-house at MULE out of 3/16 steel specifically to match up with the jacks and jack brackets on the Four Wheel Campers. These extensions are often required for wider trucks, trucks with rock sliders or wider steps, fender flares, etc. Typically only one pair is needed for the forward jacks.
Sold as Singles (1 bracket)
The heavier duty steel vs factory aluminum extensions inhibits flex concerns on heavier campers.
Bolt holes may not line up to older camper brackets.
Made in the USA
Note: bare steel will rust. These extensions are not meant to be left on the camper unless they are painted or powder-coated.
Alu-Cab HD Load Bars provide the ultimate versatility for mounting Alu-Cab products such as the Expedition III rooftop tent or Shadow Awn or for carrying more gear on your Explorer Canopy or Expedition III rooftop tent.
Please Note: Load Bar Endcaps are included with the feet.
- Explorer Canopy Roof
- Khaya Camper Roof
- Canopy Camper Roof
- Expedition III Base
- Wood Box Base
- Expedition III Rooftop Tent Top
- Explorer Canopy Roof Top (W/O RTT)
Wavian 20 Liter (5.3 Gallon) Jerry Cans.
These leak-proof steel fuel cans come directly from Wavian, the factory that has supplied many NATO countries for over 75 years, and are the highest quality jerry cans on the market today. Rigorously tested, they boast a number of features, including 0.9 mm steel walls, an interior rust-proof Rezol lining, internal breather pipe for splash-proof pouring, a three handle configuration for easy carrying, a Leak-proof bayonet closure, and a locking pin for the cap.
Wavian currently produces the only EPA, CARB, and DOT approved steel fuel cans that are 100% legal in all 50 US states. Includes spout and an adapter for vehicles with smaller filler receivers.
Available in OD Green, Black, Yellow, and Red.
OD GREEN IS CURRENTLY ON BACK ORDER STATUS. IF YOU ORDER GREEN WE EXPECT TO FILL YOUR ORDER BY MID TO LATE AUGUST.
Dimensions (L x W x H in inches) |
Weight 20L: 12 lbs |
Alu-Cab’s new Tilting Fridge Slide now operates as a straight pull out slide, and it has the option to tilt. This means you have the advantage of a fridge slide that runs on stainless steel runners with sealed stainless-steel bearings. This product offers maximum strength with the ability to carry greater loads, with greater resistance to dust and the harsh off-road conditions.
With double locking pins, it is secured firmly in place when locked in position – with no risk of the fridge slide breaking free when the road gets rough.
The fridge slide allows easier access when the fridge is positioned at height. It also helps to clear the canopy or back doors when there isn’t space to open the lid. Built from both Stainless Steel and Aluminium, this tilting fridge slide offers good strength without adding excessive weight.
External dimensions: 863mm x 585mm
Usable dimensions: 800mm x 500mm
Weight: 24 lbs
This tilting fridge slide fits the following fridge freezers:
If your fridge freezer is not listed, this fridge slide will fit a fridge freezer up to a 800x500 ( 31.5x19.68)
alu-cab — Mule Expedition Outfitters
Alu-Cab’s new Tilting Fridge Slide now operates as a straight pull out slide, and it has the option to tilt. This means you have the advantage of a
Alu-Cab Tilting Fridge Slide (Large Fridges)
Tilting Fridge Slide (Large Fridges) – Deer Creek Overland Gear
With a flat mounting base for secure fitment and multi position latch, the fridge slide will ensure easy access to your ARB Fridge Freezer at all
ARB FRIDGE SLIDE
Alu-Cab Tilting Fridge Slide (X-Large Fridges - TFS 80) — CB Adventure Supply
FRIDGES — Mule Expedition Outfitters
Fridge Slide – Equipt Expedition Outfitters
Modified Alu-cab fridge slide
FRIDGE SLIDES — Mule Expedition Outfitters
alu-cab — Mule Expedition Outfitters
Fridge Slide with Tilt to be Used with Large Cooler?