Bent to 45 degrees to reach around obstructions, the long, tapered, finely tipped nose grasps, twists, and pulls tiny wires and small parts with the uniform contact and sure grip of fine, crosscut teeth.
Bent to 45 degrees to reach around obstructions, the long, tapered, finely tipped nose grasps, twists, and pulls tiny wires and small parts with the uniform contact and sure grip of fine, crosscut teeth. Gently assisting the opening action of pliers, the long-arm coil spring is neatly tucked between handles so it won't get in the way or be accidentally dislodged. The spring itself has a relaxed opening angle of 137 degrees-nearly twice the opening angle of the pliers-so it stays properly tensioned when pliers are fully opened.
Extra Long, Bent Nose: A smooth, 70-degree bend works around obstructions. Originating from a point more than halfway down the jaw, the bent section is exceptionally long, offering a generous reach into tight, narrow spaces. Crosscut Teeth: Oriented at 120 degrees to each other60 degrees to each side of the jaw centerlinethe serrations are cut in two passes to form regularly-spaced, diamond-shaped teeth.
Tekton PGF10406 6 in. 70-Degree Bent Long Nose Pliers
Angled Long Nose Pliers Delicate Colors
TEKTON 2-Piece Long Nose Locking Pliers Set PLK90303 - The Home Depot
Bent to 45 degrees to reach around obstructions, the long, tapered, finely tipped nose grasps, twists, and pulls tiny wires and small parts with the uniform contact and sure grip of fine, crosscut teeth. Gently assisting the opening action of pliers, the long-arm coil spring is neatly tucked between handles so it won't get in the way or be accidentally dislodged.
Tekton PMN11301 Mini Bent Long Nose Pliers
TEKTON 7 in. 90° Bent Nose Pliers 34233 - The Home Depot
Extra Long, Bent Nose: A smooth, 70-degree bend works around obstructions. Originating from a point more than halfway down the jaw, the bent section is exceptionally long, offering a generous reach into tight, narrow spaces. Crosscut Teeth: Oriented at 120 degrees to each other60 degrees to each side of the jaw centerlinethe serrations are cut in two passes to form regularly-spaced, diamond-shaped teeth.
Tekton PGF10406 6 in. 70-Degree Bent Long Nose Pliers
Performance Tool W30728 8-Inch Lineman's Pliers
Extra Long, Bent Nose: A smooth, 70-degree bend works around obstructions. Originating from a point more than halfway down the jaw, the bent section is exceptionally long, offering a generous reach into tight, narrow spaces. Crosscut Teeth: Oriented at 120 degrees to each other60 degrees to each side of the jaw centerlinethe serrations are cut in two passes to form regularly-spaced, diamond-shaped teeth.
Tekton PGF10406 6 in. 70-Degree Bent Long Nose Pliers
A versatile combination of straight, curved, and long nose jaw profiles hold round, hex, and square shapes and clamp flat stock, L-angle, and sheet metal for welding or assembly. The pull-type release lever allows fast and controlled one-handed operation. Because your hand stays in nearly the same place to release the pliers as it does to lock them, our pull-type lever gives you more control during the release, preventing the pliers from forcefully flying open, especially when highly tensioned.
Tekton Locking Pliers Set 4 Piece Straight Jaw Curved Long Nose PLK99902
KNIPEX 8 in. Long Nose Pliers W/O Cutter-Double Angled 38 81 200 B
TEKTON Mini Pliers Set (6-Piece) PMN99906 - The Home Depot
The Knipex 25 21 160 needle nose pliers which are pointed at the front and have tips at a 40 Deg angle serve the user in many areas. They are suitable for the fine, measured gripping of components and for the powerful cutting of cable and wire. Their cutting edges are shaped to produce a bite type cut. The cutting edges are additionally induction hardened to approx. 61 HRC. These pliers are therefore also appreciated for the ability to cut cable as well as soft, medium-hard and even hard wire.
Knipex Angled Long Nose Pliers
The Knipex 25 21 160 needle nose pliers which are pointed at the front and have tips at a 40 Deg angle serve the user in many areas. They are suitable for the fine, measured gripping of components and for the powerful cutting of cable and wire. Their cutting edges are shaped to produce a bite type cut. The cutting edges are additionally induction hardened to approx. 61 HRC. These pliers are therefore also appreciated for the ability to cut cable as well as soft, medium-hard and even hard wire.
Knipex Angled Long Nose Pliers
TEKTON Mini Pliers Set (6-Piece) PMN99906 - The Home Depot