17oz Glass Sublimation Water Bottle – Blanks By Tiffa Collections

4.7

(273)

Write Review

$ 5.50

Add to Cart

Qty

In stock

Description

Sublimation 17oz Glass Water Bottle. You can also use permanent vinyl if you do not wish to sublimate on it.

Included in box:

1 Glass Water Bottle
1 Box

Dimensions: (H)6.75 x (W)8.15

Note: The recommended settings above for sublimation may need adjustments for best results. Sublimation settings will vary depending on the heat press brand, model ink, paper and atmospheric conditions.

Instructions:

Tumbler press settings:

- Temperature - 374 degrees F
- Dwell time - 150 sec rotating after 75sec
- Pressure - medium

Steps:

1. Preheat the press to 374° F while preparing the product.

2. Wipe down product with soft cloth misted with isopropyl alcohol.

3. Print and apply transfer to product using heat tape.

4. Press for 150 sec rotating after 75 sec with moderate pressure.

5. Use heat resistant gloves, the item will be very hot.

Sublimation 17oz Glass Water Bottle. You can also use permanent vinyl if you do not wish to sublimate on it. Included in box: 1 Glass Water Bottle1 Box Dimensions: (H)6.75 x (W)8.15 Note: The recommended settings above for sublimation may need adjustments for best results. Sublimation settings will vary depending on the heat press brand, model ink, paper and atmospheric conditions. Instructions: Tumbler press settings: - Temperature - 374 degrees F- Dwell time - 150 sec rotating after 75sec- Pressure - medium Steps: 1. Preheat the press to 374° F while preparing the product. 2. Wipe down product with soft cloth misted with isopropyl alcohol. 3. Print and apply transfer to product using heat tape. 4. Press for 150 sec rotating after 75 sec with moderate pressure. 5. Use heat resistant gloves, the item will be very hot.

(Variety of Colors), Frosted Glass Water Bottle for Sublimation Printing. These bottles are 500ml in size and are sublimation ready. The top