Protect your Bare Wood or Painted Surfaces with this Non-Yellowing Sealer. Two Ways to Use Our Poly. As a Sealer : Make sure the surface is free of dust. Apply Sealer using a Fine Filament Brush. Wait 3-4 hours dry time between multiple coats. Finely sand between coats & wipe Clean, TWO COATS RECOMMENDED. Allow Final Coat 8 hours to cure/dry. As a Glazing Finish : Make sure surface is free of dust. Apply sealer/glazing using a fine filament brush. Apply Pigment by sprinkling into the wet sealer. Use a second sealer dipped filament brush to spread the pigment across wet surface. Repeat to achieve desired effect. Move to new area and continue. (best to apply in small areas, so sealer will not dry before adding pigment.) CAUTION Use Poly Acrylic Sealer in a well Ventilated Area. Clear Satin Finish - Great for Protecting Bare Wood or Painted Surfaces Non-Yellowing Sealer - Low VOC - Low Odor Two Different Ways to use the Poly - Bare Wood & Painted Surfaces or Create a Glazing Finish Glazing Finish - select from 13 pigment colors (pigment sold separately) Caution: Use Poly Sealer in a well Ventilated Area. STIR THOROUGHLY - DO NOT SHAKE - AVOID BUBBLES Keep out of reach of children Caution: Use Sealer in a well Ventilated Area.
Varathane Ultimate Satin Crystal Clear Water-Based Polyurethane 1 qt - Ace Hardware
High Performance Polyurethane, Urethane coating
Can 1/Case - 50206 The highest quality water-based clear gloss finish available today. Its exceptional durability and abrasion resistance, coupled with high solids, very low odor, and very low VOC, make it the clear alternative to conventional solvent and water-based polyurethanes. Also available in satin (sold separately).
AFM SafeCoat, Polyureseal BP, Matte, 1-Quart
The combination of excellent flow-ability and a high-gloss sheen makes DK400 the #1 choice for top-coating 3D metallic epoxy floors in commercial and residential spaces. DK400 lays down like glass and is a great choice whenever your project calls for protecting concrete from chemical or abrasive wear.
Polyurethane Solvent Based Clear Concrete Sealer. Dk-400. High Gloss
Product Categories — Helix Color Systems
Restore Old Clear Acrylic Floor Sealers - Restore-A-Seal™ by DURÁVEL - Durável
Minwax Fast Drying Polyurethane Protective Wood Finish, Clear Satin, 1 Gallon - Household Varnishes
Water Based Polyurethane Topcoat: High Performance
Polarion 2K Acrylic Urethane Interior Clear Sealer Gallon, DSI
GlazeGuard Satin Finish Glazed Porcelain Tile Sealer
MasonryDefender Stamped Concrete Sealer is a non-yellowing acrylic polymer blend sealer formulated for use on properly cured stamped concrete surfaces. It leaves an attractive, durable, semi-gloss finish that protects stamped concrete surfaces from damage and color loss due to ultra-violet light, moisture and abrasion/wear. MasonryDefender Stamped Concrete Sealer is designed for use on both interior and exterior concrete.
Masonrydefender Stamped Concrete Sealer 1 Gal - Clear Water-Based Semi-Gloss Sealer for Decorative Concrete Surfaces, 1 Gallon
The Armor AR 350 is a solvent based wet look acrylic concrete sealer that can be used to seal and enhance concrete and paver surfaces. The durable,
1 gal. Solvent Based Acrylic Wet Look Concrete Sealer and Paver Sealer
PolySeal is a water-based, polyurethane acrylic wood finish that can be applied to all bare interior wood surfaces. The product is ideal for use on
PolySeal Water Based Polyurethane Acrylic Interior Wood Varnish - 5 Gallon Crystal Satin