This Epoxy Resin item by ProClearEpoxyResin has 7 favorites from shoppers. Ships from Lake Elsinore, CA. Listed on Sep 25, 2023
Our A+ Deep Pour Epoxy is a clear epoxy resin commonly used for thicker applications like live-edge river table pours, creative table making, wood slabs, woodworking, deep encapsulations, and castings. This epoxy cures crystal clear.
4 gallon Kit (3 Gallons-Part 1, 1 Gallon-Part 2 equals a 4 gallon kit)
This product is a 3:1 mix. You can pour up to 2" deep per individual pour. Full cure is typically 24-48 hours. (Temperature Dependent)
These mixing instructions are only recommendations.
PLEASE NOTE: larger mixes will cure faster and smaller mixes will cure slower. This resin is only permitted to pour up to 2" deep per individual pour. You can do multiple pours, just make sure to let the first pour gel before adding the next
pour. Every table is different. Make sure to not add more than 4 gallons on 1
pour.(WEATHER ALERT! Heat will accelerate the cure and cold weather will slow the cure).
1. This resin is mixed at a 3:1 ratio by VOLUME. Example (3 cups to 1 cup). If mixing by weight (using a digital scale), mix 100/30 parts by weight (resin/hardner). Make sure to always use mixing cups. Do not mix all together at once (both bottles).
2. When mixing your resin, make sure to use a round disposable container.
3. When mixing, always pour the resin (A) into the hardener (B). Hand stir components for a minimum of 3-5 minutes in a round fashion. Stir slowly to help avoid air bubbles. Make sure to scrape the sides and the bottom of the mixing
container. It is very important that the 2 components are properly mixed. If you see swirls or striations in the mix, you will need to mix further. Cold weather can slow this process and the mixture may look milky. Mix until clear.
4. Apply Immediately to avoid excessive heat and micro bubbles. After your mixture is complete, pour into river bed. Let resin self level.
5. When pouring your resin into your application, pour as close to your piece as possible. Pour in a linear line, so that resin flows from one end to the other. This technique helps avoid bubble entrapment.
PLEASE NOTE: Cure times will vary depending on mass and temperature. Full cure is typically 24-48 hours, based on a room temperature of 77F. Cold weather slows cure. Any polishing or sanding should be done after a full cure (24 hours). Mixing resin can be tricky. If you experience any negative results, such as tacky or uncured resin, please check out our help docs on our website.
When applying this product, use gloves, goggles, and proper safety equipment. Please refer to the safety data sheet before using any of our epoxy products.
Nicpro 3 Gallon Deep Pour Epoxy Resin Kit, 2 to 4 Inch Depth Crystal C
ThickSet Clear Casting Epoxy is a deep pour resin system for casting encapsulating molding projects. Easy to use- just measure mix and pour. Compare to WiseBond MAS FGCI and Stone Coat Countertops deep pour and casting epoxy resins.
TotalBoat Thickset Deep Pour Clear Casting Epoxy Resin 8 Gallon Kit
Epoxy Poured Tables
Resin River Bar
The Unicone Art craft resin kit dries crystal clear with no yellowing over time. It's protective but not too thick, and it's easy to mix and pour. Low bubbles too!.
Extra Deep Pour Resin Epoxy Kit (2 to 4 inch Pours), 1.5 GL, UV Resistant, Low Odor, Crystal Clear, Bubble Free, 2:1 Art Casting Resin, River Tables
River Tables & Casting Perfection with Deep Pour Epoxy
Epoxy River Bar Top
Deep Pour Epoxy Resin 0.75 Gallon, 2 to 4 inch Depth Clear Epoxy Resin Kit with Mixer, Bubble Free, Low Odor 2:1 Casting Resin for Table Top, Countert
Deep Pour Craft Resin 1.5 Gallon Kit. For up to 2 Inch Casting. Mirror-like finish. Bubble-free. Non-yellowing. Food Safe, Heat & UV Resistant
1.5 Gallon Kit Bottle Epoxy Resin River Table DEEP Pour Cast Art Craft Jewelry