Resin Moulding Casting Tank/Pot 20 Litre Internal Dimensions Height = 39cm Diameter = 32cm. 60Psi maximum working pressure. Casting under pressure is the best way to make high quality resin castings. This is especially true with difficult recesses and complex moulds. Pressure casting compresses air bubbles to sizes hard to detected by the human eye creating a virtually bubble free casting. Simply cast your part in your mould and then insert your mould into the pressure pot. Apply positive air pressure from any regulated compressor and leave to cure under pressure. These tanks are modified for casting only and can not be used for paint. All unused outlets are permanently capped with 150psi 316 stainless steel caps. Important points regarding pressure tanks: The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a working pressure of 60 Psi or below. Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
The Performance Series non-ASME, resin casting (mold) pressure tank comes configured with a single air pressure regulator and No pickup tube. The
Performance Series Resin Casting 20 Gallon Pressure Tank
5 Gallon (20 Liters) Pressure Pot Tank for Resin Casting — TCP Global
G4 Pond Sealer / Damp Seal Glassfibre and Resin Supplies Ltd
Professional heavy-duty 5 gallons (20 liters) capacity pressure pot tank for resin casting. The tank has a maximum operating pressure of 50 PSI. Holds
TCP Global 5 Gallon (20 Liters) Pressure Pot Tank for Resin Casting - Heavy Duty Powder Coated Pot with Air Tight Clamp On Lid, Caster Wheels
When using resin to cast and encapsulate, it's crucial that you remove the air bubbles that inevitably creep into your resin as you pour. That's where the California Air Tools 2.5-gallon pressure pot becomes essential to ensuring top-quality results. Just pour the resin into your mold, set it inside, seal the lid and connect an air compressor (sold separately) with the included standard quick coupler.
California Air Tools 2.5 gal. 255c Pressure Pot for Casting
TCP Global 5 Gallon (20 Liters) Pressure Pot Tank for Resin Casting - Heavy Duty Powder Coated Pot with Air Tight Clamp On Lid, Caster Wheels, Regulator, Gauge - Use for Curing
20ltr Resin molding Pressure Pot, Resin casting pot,Resin Pressure Tank
TCP Global 5 Gallon (20 Liters) Pressure Pot Tank for Resin Casting - Heavy Duty Powder Coated Pot with Air Tight Clamp On Lid, Caster Wheels, Regulator, Gauge - Use for Curing
20ltr Resin molding Pressure Pot, Resin casting pot,Resin Pressure Tank
Resin Casting – Pressure Pot 10Ltr
Rebound™ 25 – Self Thickening Brush-On Silicone
Professional heavy-duty 5 gallons (20 liters) capacity pressure pot tank for resin casting. The tank has a maximum operating pressure of 50 PSI. Holds
TCP Global 5 Gallon (20 Liters) Pressure Pot Tank for Resin Casting - Heavy Duty Powder Coated Pot with Air Tight Clamp On Lid, Caster Wheels
Buy the California Air Tools - Pressure Pot for Resin Casting for sale online from Woodcraft. Visit us to order online or find your local Woodcraft
Pressure Pot for Resin Casting
Resin Casting Accessories – Turners Warehouse