Outdoor Marine Boat Adhesive/Glue –

4.7

(373)

Write Review

$ 25.50

Add to Cart

Qty

In stock

Description

Recommended for Flexa Woven Marine Flooring This is the ultimate glue for boats. It works on wood, aluminum, and fiberglass as well as concrete. Extremely water resistant Non-flammable Use in heavy traffic areas Solvent-free Ideal for any marine flooring including felt-backed woven flooring 1 Gallon bucket - Covers App
Recommended for Flexa Woven Marine Flooring This is the ultimate glue for boats. It works on wood, aluminum, and fiberglass as well as concrete. Extremely water resistant Non-flammable Use in heavy traffic areas Solvent-free Ideal for any marine flooring including felt-backed woven flooring 1 Gallon bucket - Covers Approximately 14 feet of our 102 wide flooring. Shipping may be delayed due to extreme cold weather. WARNING: Prop 65 Disclaimer

Recommended for Marideck Marine Flooring

Use our Water Based Solvent for Wood and our Solvent Based Glue for Aluminum, Fiberglass or wood.

1 Gallon will usually cover about 14 Feet of flooring (125 sqft)

3 Gallons will usually cover about 42 Feet of flooring (375 sqft)

Shipping may be delayed due to extreme cold weather.

INSTRUCTIONS

Prep the area to make sure it is clean of all debris. It is best to apply to a smooth surface. Apply the adhesive evenly with a paint roller. Allow the adhesive to dry approximately 5-10 minutes until it feels a bit tacky with your finger. Roll flooring over the glue and apply even pressure. Some People have used a heavy pipe or a simple push broom to evenly press the flooring down on to the glue.

IMPORTANT: If your wood surface is sealed with a water-proofing sealant, then MD-102 (sovent-based) adhesive must be used.