Matte Finish Additive for Concrete Sealers

Simply add to any solvent based acrylic to instantly create a matte or satin finish concrete sealer. Reduces shine and glare.
MATTE FINISH ADDITIVE Matte-50 is an easy to use, liquid matting agent for use in solvent-based acrylic sealers. Matte-50 gives you the unique ability to instantly create a matte or satin finish sealer at any time. Since the majority of sealers on the market are only produced in a gloss finish, this is a huge advantage. Matte-50 has ZERO VOC's and meets all applicable EPA Voc Regulations throughout the United States. Matte-50 is packaged in pint bottles.   Essentials Easy to Use Matte or Satin Finish For Solvent-Based Sealers Excellent Suspension Usage: Up to 8 oz / Gallon Second Coat Only   Tech Data Sheet Safety Data Sheet   Warning: This product can expose you to chemicals including Cumene, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.   Mixing Instructions Add desired amount of Matte-50 to solvent based acrylic sealer and stir with a drill mixer for approximately 2-3 minutes or until homogeneous, prior to application. Stir lightly periodically during application to ensure an even gloss level. Failure to do so may result in a streaked finish with varying gloss levels. Remix any material left over with a drill mixer before applying. Matte-50 is a flammable liquid. An approved respirator, safety goggles, and gloves are recommended. Follow application instructions for chosen solvent based sealer. Matte-50 should be added to second coat only. Apply first coat of sealer to properly prepared concrete without Matte-50.   Recommended Addition Levels: Satin Finish - Add 1 pint per 5 gallons of acrylic sealer (3.2 oz / gallon)Matte Finish - Add 2 pints per 5 gallons of acrylic sealer (6.4 oz / gallon)   Before application, always test product in an inconspicuous area to ensure appearance and compatibility are acceptable.  

Matte Finish Additive for Concrete Sealers

The Armor Wax – Matte is designed to instantly enhance sealed and unsealed interior concrete surfaces, and revive old concrete coatings with an

Concrete Wax - Matte

The Armor Matte pack is a matte additive for solvent based concrete sealers and solvent based urethane coatings. 1-2 containers of matte pack can be added to up to 5 gallons of sealer/coating. Depending on the amount added, the Armor Matte pack will reduce or eliminate sheen or gloss.

Gloss Reducing Matte Pack for Solvent Based Acrylic Sealers and Urethane Coatings

Looking for the best tinted concrete sealer for your driveway, walkway, patio, pool deck, or porch. Our concrete staining products are perfect for adding a touch of color to your concrete surfaces while also protecting and preserving them. Our sealers are easy to apply and will help to extend the life of your concrete.

Black Tinted Concrete Sealer - Patio | Direct Colors

CRYLI-TEK 5505 - Ghostshield Concrete Sealers

Foundation Armor Ultra Low VOC 5 gal. Clear Wet Look High Gloss Acrylic Concrete, aggregate and Paver Sealer

U-SEAL™ Concrete Sealer

Ghostshield: Siloxa-Tek 8500 – Concrete and Curbing Source

All About Matte Concrete Sealer – The Paver Sealer Store

Non-Toxic Concrete Sealers & Stains - My Chemical-Free House