TotalBoat Epoxy Primer Thinner 200 Marine Solvent (Quart) 32 Fl Oz
TotalBoat Epoxy Primer Thinner 200 Marine Solvent (Quart) 32 Fl Oz (Pack of 1)
TotalBoat Aluminum Boat Barrier Coat is a high-build epoxy primer that creates a moisture barrier to protect aluminum and pontoon boats. Its anti-corrosive properties are ideal for protecting all underwater metals including lead, bronze, cast iron, stainless, and aluminum. Compare to Interlux InterProtect 2000E and Pettit Protect epoxy primers.
TotalBoat Aluminum Boat Barrier Coat Primer Gallon Kit Gray
TotalBoat Aluminum Boat Barrier Coat is a high-build epoxy primer that creates a moisture barrier to protect aluminum and pontoon boats. Its anti-corrosive properties are ideal for protecting all underwater metals including lead, bronze, cast iron, stainless, and aluminum. Compare to Interlux InterProtect 2000E and Pettit Protect epoxy primers.
TotalBoat Aluminum Boat Barrier Coat Primer Gallon Kit Gray
TotalBoat Topside Primer is used above the waterline as an undercoat prior to painting. Compatible with all polyurethane and enamel topside paints both 1 and 2 parts. Compare to Interlux Pre-Kote and Pettit EX Prime Undercoater.
TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood (White, Gallon)
TotalBoat Epoxy Primer Thinner 200 is specially formulated for use as a reducer / thinner for these 2-part epoxy coatings:TotalBoat TotalProtect Epoxy
Epoxy Primer Thinner 200
TotalBoat-439900 TotalProtect Epoxy Barrier Coat System (Gray), 1 Gallon (Pack of 1) : Sports & Outdoors
TotalBilge is an epoxy-based bilge paint used to protect bilge bulkhead and locker areas. It stands up to exposure to harmful marine elements like heat humidity mildew grease and grime. This 1 part paint is easy to apply providing superior coverage with a hard surface finish. It won't stain or mildew. Available in quart and gallon sizes in your choice of Gray or White. Antifreeze grease diesel fuel and engine oil are hard on bilges.
TotalBoat Totalbilge Epoxy Based Bilge Paint for Boat Bilges, Bulkheads, Engine Rooms and Locker Areas (Gray, quart)
TotalBoat Aluminum Boat Barrier Coat is a high-build epoxy primer that creates a moisture barrier to protect aluminum and pontoon boats. Its anti-corrosive properties are ideal for protecting all underwater metals including lead, bronze, cast iron, stainless, and aluminum. Compare to Interlux InterProtect 2000E and Pettit Protect epoxy primers.
TotalBoat Aluminum Boat Barrier Coat Primer Gallon Kit Gray
One primer, two formulas, multiple usesAbove the waterline, TotalBoat 2-Part Marine Epoxy Primer adheres extremely well to wood, fiberglass, aluminum,
2-Part Epoxy Primer
TotalBoat Aluminum Boat Barrier Coat Epoxy Primer
Two-Part Marine Epoxy Primer High-Build & Surfacing Formulas
TotalBoat Aluminum Boat Barrier Coat is a high-build epoxy primer that creates a moisture barrier to protect aluminum and pontoon boats. Its anti-corrosive properties are ideal for protecting all underwater metals including lead, bronze, cast iron, stainless, and aluminum. Compare to Interlux InterProtect 2000E and Pettit Protect epoxy primers.
TotalBoat Aluminum Boat Barrier Coat Primer Gallon Kit Gray
A light weight compound for fairing surfaces of fiberglass, metal, wood, foam, masonry, and most plastics. Easy to mix 1 to1 mix ratio - just mix the white and red components until there is no streaks. Creamy smooth consistency makes it easy to spread and feather to a fine edge; will not sag on vertical and overhead surfaces Cures Fast.
Fasco Epoxies Fas-Fair #26 Epoxy Fairing Compound Quart Kit
TotalBoat Wet Edge is a single part high gloss polyurethane marine topside paint for boats with high gloss. Choose from 21 popular colors in quarts or gallons. Compare to Interlux Brightside and Pettit Easypoxy.
TotalBoat Wet Edge Marine Topside Paint White Gallon
TotalProtect is a high build epoxy primer for use above and below the waterline. It creates a barrier coat to prevent water absorption and migration the main cause of blistered fiberglass hulls. It is also an excellent primer for all underwater metals. This 2 part primer can be used with all paints. 3 to 1 mix ratio formula is easy to use dries quickly and requires no sanding. After mixing thoroughly allow an induction period of 20 minutes prior to reduction and application.
TotalBoat TotalProtect Epoxy Barrier Coat System (White quart)
