Laser HEAT TRANSFER PAPER Light Techni Print EZP 50 Sheets 8.5”x11

Laser HEAT TRANSFER PAPER Light Techni Print EZP 50 Sheets 8.5”x11

4.5
(612)
Write Review
More
$ 16.99
Add to Cart
In stock
Description

Find the best Transfer Paper for your project. We offer the Laser HEAT TRANSFER PAPER Light Techni Print EZP 50 Sheets 8.5”x11” Made in USA for $34.99 with free shipping available.
Laser HEAT TRANSFER PAPER Light Techni Print EZP 50 Sheets 8.5”x11” Made in USA TECHNI-PRINT® Papers are designed for both oil and oil-less laser printers and copiers. They are for the heat transfer of photos and images to T-shirts, sweatshirts, mousepads,coasters,puzzles,handbags,binders,pad folios,paper,leather,magnets,wood veneer, nylon and more. Choose garments that have a tight weave. This is particularly important when transferring to sweatshirts. PRINTING For printing onto textiles (ie: Shirts, mouse pads, etc) Set your resolution to 200-250 DPI maximum. Printing at higher resolutions than this is a waste. Fabric can only hold approximately 200-250 DPI of resolution! You will still get good photo quality results. 1. Mirror the image. 2. Load the paper so that the image will appear on the coated side of the paper. Fan the sheets of transfer paper on all four sides to reduce static charge Place the paper in by-pass tray (if available) 3. TECHNI-PRINT® Paper should be fed into the copier or printer with the short dimension first (grain long). 4. Start with “Plain Paper” mode. If toner does not fuse completely, adjust to a heavier paper setting. 5. Trim away the unprinted areas of the transfer for softer hand (feel) if desired. TRANSFERRING Using a Commercial Heat Press (only) 1. Place the transfer sheet face down on the substrate and press: 30 seconds at 375oF using heavy pressure. Press must snap closed firmly. 2. Peel while still hot! Peel Transfer IMMEDIATELY. WASHING INSTRUCTIONS Turn garment inside out and wash in cold water using a mild detergent. Do not use bleach. Dry on low heat setting. Do not iron directly on the transferred area. STORAGE AND HANDLING OF TECHNI-PRINT EZP HEAT TRANSFER PAPERS Store TECHNI-PRINT® 4.0 Papers in a cool, dry area and do not remove from carton or poly bag until you are ready to use.

50 Pack 8.5x11 TECHNI-PRINT EZP High Temp Heat Transfer Paper - Neenah

Neenah TECHNI-PRINT EZP High Temp 8.5x11 Heat Transfer Paper - 50 Pack

8.5 x 11 Neenah IMAGE CLIP

Heat Transfer Paper Laser Light Techni Print EZP Light garment 8.5x11 -50 Sh

8.5 x 11 Forever Flex-Soft No-Cut

Using TechniPrint EZP Transfer Paper -

Laser HEAT TRANSFER PAPER Light Techni Print EZP 50 Sheets 8.5”x11

Light Laser – Heat Transfer Paper – Same Day Shipping

3G JET-OPAQUE Inkjet Transfer Paper - 8.5 x 11 Packs

Forever Multi-Trans Hard Surface Laser Transfer Paper - 8.5 x 11

TechniPrint EZP - Heat Transfer Paper for Laser Printers

Heat Transfer Paper Heat Transfer Warehouse

Neenah 3G Inkjet Heat Transfer Paper for Dark or Light Colors 8.5x11 25 Sheets

Heat Transfer Paper Sample Pack 5 Sheets of 3G Jet Opaque for Dark Colors & 5 Sheets of Jetpro for Light Colors

TechniPrint EZP for laser printers is the new and revolutionary heat transfer paper from Neenah Paper - designed for the easiest peel of all, this

Techni Print EZP - Laser Heat Transfer Paper 8.5x11 100 sheets