Juki Hinged Zipper Foot for TL Series Machines

With this piping foot, the sewing machine is able to make piping cords with ease without using an iron and adhesive interlining. This piping foot can be widely used for sewing edges of bags and attaching decorative lines on knick knacks. There is slot that is approximately 3mm in diameter for passing a cord to the undersurface of piping foot on the left side of needle entry hole. This is a kind of hinged foot, which has a spring at the rear and the front part is raised.

The 7mm foot measures a perfect .28in from the needle to the edge of the presser foot. Use the 7mm Regular Hinged Foot to achieve a perfect 7/25 inch seams in quilting or hemming.

Juki TL Series Standard Hinged Quarter inch Presser Foot

JUKI

Hinged Zipper Foot - Accessories

Hinged Zipper Foot 3mm for Juki TL & J-150 QVP Machines - Juki Junkies

The guide on the foot enables you to sew a perfect 7mm seams every time. The guide can also be used wherever a 7mm seam is called for but the markings on the needle plate cannot be used, such as when completing a flat seam.

Juki TL Series Hinged 7mm Piecing with Guide Presser Foot

Juki 1/4 inch Seam Foot with Guide for TL Series Sewing Machines

Juki MO-600 Series 3 Presser Foot Kit

Hinged Zipper Foot (2.5mm) for Juki TL & J-150 QVP Machines - Juki Junkies

Zipper Split Hinged Sewing Machine Foot - (40322SH/P363) - WAWAK

Invisible Zipper Foot

Juki Metal Invisible Zipper Foot for TL Series

Juki Presser Feet