High gloss vinyl film is produced by TeckWrap, a wrap supplier. This teckwrap vinyl is the vehicle wrap created for supercars, sport cars, show cars, luxury cars, and other custom vehicles to improve car style. Color change films like chrome and carbon fiber are used for car wrapping, vinyl graphics, and decals.

TeckWrap offers new very gloss HD colors that give your vehicle a solid as well as shiny finish. Smooth one without any orange peel. The material is stretchable, and one can wrap every edge and recessed area easily. And the adhesive is safe without giving you any trouble when uninstall. The film has a PET protective layer, which helps avoid scratches during the install process (should be peeled off before heating), and a plastic liner makes the film's surface more gloss and reflective. 

Specifications

The thickness of the film: 0.15mm
The thickness of film with release liner: 0.31mm
Type of film: High grade polymeric calendered film with air release

Adhesive: Henkel solvent-based acrylic adhesive, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry
Release liner: Plastic liner
Storing period: 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, clean and dry place. Important: the top protective layer should be removed before installation, and the film should be stored without the protective layer to prevent tunneling.
Indoor life: 4 years when followed rules of application and use
Outdoor life: 3 years when followed rules of application and use (Zone1)
Dimensional stability: shrinkage less than 2%

• Plastification: between 28%-38%
• Release Force(N/25mm), standard 0.08~0.20, result 0.12, temp 25°C 60%
• Initial Adhesion Force(g/25mm), result 972.48, temp 25°C 60%
• 180°Peel Strength(N/25mm), result 15.64, temp 25°C 60%
• Holding Force(h) (GB/T4851-1998, result, ≥425H, temp 25°C 60%

Light Ageing in UV Exposure: Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 3-4, pass, Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-340, 8h UV at (60±2.5)℃ BPT, 0.89 W/ (m2•nm)@340nm, 4h condensation at (50±2.5)℃ BPT, Exposure duration: 44h

Package:  Roll width 152 cm, length 18 m, weight 13 kg

Install tips:

Application: from +16°С to +23°С, usage from -30°С to +50°С
Tools: Standard squeegee with a soft buffer
Conformability: smooth and medium curved surface
Directional: no
Overlap width: 3-4mm

Post heating: 95 Celcius

Important note: The images, colors, and finishes on screen are approximate. For the real representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job as a slight batch to batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film.

TeckWrap offers new very gloss HD colors that give your vehicle a solid as well as shiny finish. Smooth one without any orange peel. The material is stretchable, and one can wrap every edge and recessed area easily. And the adhesive is safe without giving you any trouble when uninstall. The film has a PET protective layer, which helps avoid scratches during the install process (should be peeled off before heating), and a plastic liner makes the film's surface more gloss and reflective.  Specifications The thickness of the film: 0.15mmThe thickness of film with release liner: 0.31mmType of film: High grade polymeric calendered film with air release Adhesive: Henkel solvent-based acrylic adhesive, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dryRelease liner: Plastic linerStoring period: 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, clean and dry place. Important: the top protective layer should be removed before installation, and the film should be stored without the protective layer to prevent tunneling.Indoor life: 4 years when followed rules of application and useOutdoor life: 3 years when followed rules of application and use (Zone1)Dimensional stability: shrinkage less than 2% Plastification: between 28%-38% Release Force(N/25mm), standard 0.08~0.20, result 0.12, temp 25°C 60% Initial Adhesion Force(g/25mm), result 972.48, temp 25°C 60% 180°Peel Strength(N/25mm), result 15.64, temp 25°C 60% Holding Force(h) (GB/T4851-1998, result, ≥425H, temp 25°C 60% Light Ageing in UV Exposure: Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 3-4, pass, Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-340, 8h UV at (60±2.5)℃ BPT, 0.89 W/ (m2•nm)@340nm, 4h condensation at (50±2.5)℃ BPT, Exposure duration: 44h Package:  Roll width 152 cm, length 18 m, weight 13 kg Install tips: Application: from +16°С to +23°С, usage from -30°С to +50°СTools: Standard squeegee with a soft bufferConformability: smooth and medium curved surfaceDirectional: noOverlap width: 3-4mm Post heating: 95 Celcius Important note: The images, colors, and finishes on screen are approximate. For the real representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job as a slight batch to batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film.

TECKWRAP 1ft x 5ft 5D High Gloss Black Carbon Fiber Vinyl Bubble Free Air Release Car Wrap Film Automotive DIY Decals : Automotive

GLOSS METALLIC

TeckWrap color swatch for car wrapping & vehicle graphics

DEEP GLOSS

DEEP GLOSS

Grossy Black Series - 腕時計(デジタル)

TeckWrap color swatch for car wrapping & vehicle graphics

Gloss Metallic Vinyl Wrap - RB Series (RB13-32) – Teckwrap USA

High gloss vinyl wrap – Teckwrap USA

First Digital, Connected License Plates Launching In, 55% OFF