Emerald 20 in Glitter HTV – Home Town Vinyl & More

4.6

(551)

Write Review

$ 3.99

Add to Cart

Qty

In stock

Description

Sheet = 20in x 12in. Yard = 20in x 36in Glitter is 325 Microns / 12.8 Mils and is a PU composition. Cut Settings Cricut: Blade: Standard Setting: Iron-on Silhouette Cameo: Blade: Standard, 4 Material: Heat Transfer, Smooth Speed: 8 Force: 11 Brother ScanNCut: Blade: Standard, 3 Cut Speed: 1 Cu
Sheet = 20in x 12in. Yard = 20in x 36in Glitter is 325 Microns / 12.8 Mils and is a PU composition. Cut Settings Cricut: Blade: Standard Setting: Iron-on Silhouette Cameo: Blade: Standard, 4 Material: Heat Transfer, Smooth Speed: 8 Force: 11 Brother ScanNCut: Blade: Standard, 3 Cut Speed: 1 Cut Pressure: 5 Application instructions HOME IRON• Set iron dial between Cotton and Linen• Cover with Heat Transfer Cover Sheet or Multipurpose Paper• Place on flat, hard surface (ironing board not recommended)• Press iron with medium/firm pressure (do not slide iron)• Press each section of design for 15-20 seconds• If areas of design lift after application, replace cover sheetand re-press for 10 seconds• Peel carrier warm HEAT PRESS• Cover with Heat Transfer Cover Sheet or Multipurpose Paper• Preheat garment for 2-3 seconds• Apply design at 320°F/160°C• Use medium pressure for 15-20 seconds• Peel carrier warm Click here for a printable version of all HTV application instructions Laundering: • Wait 24 hours before first wash• Machine wash warm or cold / mild detergent• Dry on normal dryer setting or Hang Dry for best results• Do not dry clean

Heat Transfer Vinyl – Emerald Vinyl

12” x 19.5”

Emerald Glitter HTV 12” x 19.5” Sheet - Heat Transfer Vinyl

Logical Color GlitterSOFT - Glitter Heat Transfer Vinyl - 10 in x 30 ft

New HTV Vinyl Products & Collections

The best sparkly glitter HTV available! 20 inch x 1 Yard roll. Choose from over 50 gorgeous colors! Can be used with a heat press, iron or embroidery.