This is an original HOSCO fret slot cutting saw. Blade length : 120 mm (4.72") Blade : carbon steel 4 different blade thicknesses : 0,5 mm; 0,53 mm; 0,57 mm; 0,6 mm Overall length : 325 mm (12.8") Teeth : 8/cm Teeth per inch : 20 Made in Japan.
This is an original HOSCO fret slot cutting saw.
Blade length : 120 mm (4.72)
Blade : carbon steel
4 different blade thicknesses : 0,50 mm; 0,53 mm; 0,57 mm; 0,60 mm
Overall length : 325 mm (12.8)
Teeth : 8/cm
Teeth per inch : 20
Made in Japan.
This is a BAKUMA KATABA 60 cm (23.6) Japanese single edged saw with a 265 mm (10.4) blade.
This is a very sharp carpenter saw for deep cut.
Blade length : 265 mm (10.4)
Overall length : 600 mm (23.6)
Blade thickness : 0,6 mm
Cutting width : 0,9 mm (±0,05 mm)
The handle is made by wood, wrapped with rattan.
It comes with 3 spare blades, so 4 blades at all for many years of work.
(It is also quicker and cheaper than to resharp)
Made in Japan.
This is an original high quality Japanese Zsaw Zetsaw HI III 265 saw + 1 crosscut spare blade.
Blade length : 265 mm (10.4)
Overall length : 600 mm (23.6)
Blade thickness : 0,6 mm
Width of cut : 0,92 mm
Pitch : 1,75 mm
Hard impulse-treated teeth, heated briefly and shockingly cooled to obtain a very hard blade.
Easy to use regardless of the cutting direction. Ideal for Cross, Rip and Slant cutting conventional sawn wood, plywood, laminated board
Excellent durability.
Wood handle wrapped with rattan.
Made in Japan.
This is an original high quality Japanese Zsaw Zetsaw HI III 265 spare blade.
Length : 265 mm (10.4)
Blade thickness : 0,6 mm
Width of cut : 0,92 mm
Pitch : 1,75 mm
Weight : 70 grams
Hard impulse-treated teeth, heated briefly and shockingly cooled to obtain a very hard blade.
Easy to use regardless of the cutting direction. Ideal for Cross, Rip and Slant cutting conventional sawn wood, plywood, laminated board
Excellent durability.
Made in Japan.
This is an original high quality Japanese Zsaw Zetsaw HI 265 spare blade.
Length : 265 mm (10.4)
Blade thickness : 0,6 mm
Width of cut : 0,92 mm
Pitch : 1,75 mm
Weight : 75 grams
Hard impulse-treated teeth, heated briefly and shockingly cooled to obtain a very hard blade.
Ideal for cross cutting conventional sawn wood, plywood, laminated board.
Excellent durability.
Made in Japan.
This is an original high quality Japanese Zsaw Zetsaw HI 265 saw + 1 crosscut spare blade.
Blade length : 265 mm (10.4)
Overall length : 600 mm (23.6)
Blade thickness : 0,6 mm
Width of cut : 0,92 mm
Pitch : 1,75 mm
Hard impulse-treated teeth, heated briefly and shockingly cooled to obtain a very hard blade.
Ideal for cross cutting conventional sawn wood, plywood, laminated board.
Excellent durability.
Wood handle wrapped with rattan.
Made in Japan.
High quality japanese kataba Zsaw Zetsaw ALPHA 265 + 1 spare blade
Blade length : 265 mm (10.4)
Overall length : 600 mm
Bladethickness : 0,6 mm
Width of cut : 0,88 mm
Pitch : 1,75 mm
Weight : 160 grams
Hard impulse-treated teeth, heated briefly and shockingly cooled to obtain a very hard blade.
Convex curved blade can cut wood deeply without slipping in the kerf, and easily achieve a straight bottom line of various half-lap joints of leather softwood or hardwood.
Ideal for cross cutting conventional sawn wood, plywood, laminated board.
Excellent durability.
Wood handle wrapped with rattan.
Made in Japan
This is an original high quality Japanese Zsaw Zetsaw ALPHA 265 spare blade.
Length : 265 mm (10.4)
Blade thickness : 0,6 mm
Width of cut : 0,88 mm
Pitch : 1,75 mm
Weight : 70 grams
Hard impulse-treated teeth, heated briefly and shockingly cooled to obtain a very hard blade.
Convex rounded blade can cut wood deeply without slipping in the kerf, and easily achieve a straight bottom line of various half-lap joints of leather softwood or hardwood.
Ideal for cross cutting conventional sawn wood, plywood, laminated board.
Excellent durability.
Made in Japan
High quality Japanese kataba Zsaw Zetsaw HI 300 rip cut spare blade.
Blade length : 300 mm (11.8)
Blade thickness : 0,66 mm
Width of cut : 0,93 mm
Weight : 100 grams
The teeth are smaller close to the handle and getting bigger at the end of the blade, for an easier start.
Hard impulse-treated teeth, heated briefly and shockingly cooled to obtain a very hard blade.
Ideal for rip cut of conventional sawn wood, plywood, laminated board.
Excellent durability.
Made in Japan.
This is an original Xbeam high quality Japanese 300 mm kataba spare blade.
Length : 300 mm (11.8)
Blade thickness : 0.7 mm
Width of cut : 1,1 mm
Pitch : 1,15 mm
Weight : 110 grams
Hard impulse-treated teeth, heated briefly and shockingly cooled to obtain a very hard blade.
Ideal for cross cutting conventional sawn wood, plywood, laminated board.
Excellent durability.
Made in Japan.
High quality japanese kataba S450 Razorsaw Gyokucho spare blade.
Blade length : 270 mm (10.6)
Blade thickness : 0,6 mm
Kerf : 0,93 mm
Pitch : 1,7 mm
Weight : 90 grams
Hard impulse-treated teeth, heated briefly and shockingly cooled to obtain a very hard blade.
Ideal for cross cutting conventional sawn wood, plywood, laminated board.
Excellent durability.
Made in Japan.
High quality japanese kataba Razorsaw Gyokucho 453 + 1 spare blade S-450 S450.
Blade length : 270 mm (10.6)
Overall length : 600 mm (23.6)
Blade thickness : 0,6 mm
Kerf : 0,93 mm
Pitch : 1,7 mm
Weight : 240 grams
Hard impulse-treated teeth, heated briefly and shockingly cooled to obtain a very hard blade.
Ideal for cross cutting conventional sawn wood, plywood, laminated board.
Excellent durability.
EVA grip handle.
Made in Japan.
This is an original BAKUMA KATABA 60cm (23.6) Japanese single edged crosscut saw
Blade length : 265 mm (10.4)
Overall length : 600 mm (23.6)
Blade thickness : 0,6 mm
Cutting width : 0,9 mm (±0,05 mm)
This is a very sharp carpenter saw for deep cross cut.
The handle is made by wood, wrapped with rattan.
Made in Japan
H-FSWG : Fret Saw Guide
Fret Saw In Guitar Building & Luthier Supplies for sale
H-FSWG : Fret Saw Guide
Japanese saw and spare blade, Japan hand tools saw
Solo Pro Fret Slotting Saw
SAWS
Fretting Tools — Cascadia Lutherie Supply Ltd.
Knew Concepts 5 Titanium Birdcage Fret Jewelers Saw With 12, 53% OFF
Shop Hosco H-FSWG Fret Saw Guide Online
Japanese Fret Slot Saw .57mm width cut - Philadelphia Luthier
The Hosco Original Fret Slot Saw. This saw cuts on pull stroke to avoid blade flexing so you can cut fret slots accurately. A perfect saw for luthiers who make high-end musical instruments. This is a must tool for shops repairing and refretting.
Hosco TL-HFSW050 Fret Slot Saw
เลื่อยมือเซาะร่อง เฟรตบอร์ด