PerfecPress Foam / Puff Vinyl "Foam" "Puff" vinyl. The product expands and takes on a foam puffy-like texture when heat is applied after the initial application on a garment. (May 2023) New Instructions for newly manufactured Puff/Foam: Both of these methods have been recommended by the Korean mfg. Most of our material has not been converted to the new process and the colors that have will be marked with a label. Option 1 - Press at 300~310F, 12-15 sec. Since Puff/Foam is highly sensitive to temperature and pressure, and most heat presses are actually a different temperature than what is displayed on the LED display, always test the material before production! Option 2 - Press at 300~305F for 4 seconds; Peel liner and press for 6-8 seconds. Since Puff/Foam is highly sensitive to temperature and pressure, and most heat presses are actually a different
PerfecPress Foam / Puff Vinyl
Foam Puff vinyl. The product expands and takes on a foam puffy-like texture when heat is applied after the initial application on a garment.
(May 2023) New Instructions for newly manufactured Puff/Foam: Both of these methods have been recommended by the Korean mfg. Most of our material has not been converted to the new process and the colors that have will be marked with a label.
Option 1 - Press at 300~310F, 12-15 sec.
Since Puff/Foam is highly sensitive to temperature and pressure, and most heat presses are actually a different temperature than what is displayed on the LED display, always test the material before production!
Option 2 - Press at 300~305F for 4 seconds; Peel liner and press for 6-8 seconds.
Since Puff/Foam is highly sensitive to temperature and pressure, and most heat presses are actually a different temperature than what is displayed on the LED display, always test the material before production!
Original Instructions: Heat Application for 3D Puff Vinyl:
Time: 10 Seconds
Temperature: 280 - 300 F / 150 C. Does not work with Cricut Easypress or Hand Iron
A laser thermometer always should be used to confirm the actual temp of your press. A large % of presses are 20+/- degrees different than the LED will show.. Most HTV materials are not affected by these temp swings but puff vinyl will be affected by higher temps.
Pressure: medium consistent pressure. Teflon pillows work well
Peel: The backing will pop off from the foam's growth.
This 3D puff vinyl is more sensitive than most HTV's and will change in different environments. If getting wrinkles in the material, generally your press is too hot. Less temp seems to be better than more temp.
Gold and Silver 3D puff vinyl seem to do better at lower temps (aprox 280-300) than the other colors, Need to test in your environment for best results.
If getting wrinkles after press, this generally means your press is too hot.
REMINDER: ALWAYS DO A TEST CUT AND TEST PRESS with 3D puff vinyl, so as not to waste material or garments. Puff vinyl is far more sensitive to heat than standard HTV materials. Many heat presses in the market do not display accurate temps on the LED screen.
Cutting Instructions for puff vinyl:
Make sure color side is facing downward (Shiny side face up)
Mirror the image
Washing Instructions:
Do not dry clean
Machine wash WARM / mild detergent
Hang Dry
Iron from backside
No chlorine bleach and no fabric softener
Wait 24 hours before first wash
Turn garment inside out
Do not use 3D puff vinyl with Cricut EasyPress or a hand-iron. Puff vinyl will not expand properly.
Puff Vinyl by the Ft 20
20 PerfecPress Foam/Puff HTV Sheets Printing Supplies
3D Puff Heat Transfer Vinyl, Puffy HTV
12x20 3D Puff Heat Transfer Vinyl HTV Sheets Puff Vinyl
20 PerfecPress Foam/Puff HTV Sheets Printing Supplies
3D Puff Heat Transfer Vinyl, Puffy HTV
HT-Puff 20 x 12 Sheet Heat Transfer Vinyl 4u – HEAT TRANSFER
20x36 3D Puff Heat Transfer Vinyl HTV Sheets Puff 3D HTV
3D Puff Heat Transfer Vinyl, Puff HTV, foam Heat Transfer vinyl
USD-250-$2.50-$2.50 USD-2.50
Pink / 12x10 Sheet