This Hand Torches item by JetsInc has 284 favorites from shoppers. Ships from Sun Valley, CA. Listed on 20 Dec, 2023
8 PIECE SET JETS KIT Product # 1020-400712
1. SOLDERING BOARD CERAMIC PLATE HEAT RESISTANT 5" x 5" SQUARE BLOCK JETS Product# 1922-4055 Made in USA
SPECIFICATIONS:
- Dimensions: 5" x 5" x 1/2" Thick (120mm x120mm x 12.7mm)
- Temperature Tolerance: Up to 2000ºF / 950ºC.
- Reflects Heat
- Ceramic (Non-Asbestos)
- Board Weight: 14oz.
2. SOLDERING PICK TITANIUM TIP NON ROLL HANDLE JETS Product # 1919-950 G (Handle Color may Vary)
SPECIFICATIONS:
- Overall Length: 6-1/2" - 165mm
- Pick Length: 2" - 53mm
- Handle: Non Rolling Handle NOTE (Hex End Head -Color may vary)
- Weight: 0.6oz. - 16gr
3. THIRD HAND BASE HELPING HAND BASE ONLY TWEEZER TOOL HOLDER 3RD HAND BENCH WORK JETS Product # 1418-101
SPECIFICATIONS:
- Base Material: Cast Iron
- Base Diameter: 2-1316" - 71.5mm
- Base Weight: 12.2oz
4. FIBER GRIP TWEEZERS CROSS LOCKING SELF CLOSING BENT TIP JETS Product # 1419-5018
SPECIFICATIONS:
- Overall length: 6-1/2”
- Tweezer Tip: Bent 45o - Serrated
- Weight: 2 oz
5. CROSS LOCK TWEEZER SHORT POINTED SELF CLOSING REVERSE ACTION JETS Product # 1419-5001
SPECIFICATIONS:
- Overall length: 4-3/4”
- Tweezer Tip: Pointed - Serrated
- Weight: 2 oz
6. HANDY FLUX™ - Paste Made by Lucas Milhaupt 7oz. JETS Product # 1924-407
All purpose, low temperature flux Handy® Flux is a long lasting white paste type, very durable won’t break down from prolonged heat, an all-purpose flux for use in brazing and soldering Gold, Silver, Brass, Copper and other Non-Ferrous Metals. Flux is for torch brazing - NOT soldering iron.
Handy Flux is an active fluoride/borate-type flux which is appropriate for all nonferrous metals and begins to melt and dissolve oxides at 600°F, having an effective temperature range from1100° F-1600° F. Paste formula can be cleaned up with hot water.Handy FluxTM is widely used in Jewelry Making, by Silversmiths, and in Creative Arts.
Prior to soldering make sure joints and the solder are clean, flux the full surface area to prevent oxidation and allow for good solder flow, and a good brazed joint.
Soldering Note: Clean - Surface & Joint is important and not too much Solder, good even heat over entire joint area. Clean remove oxides and other soldering residues prior to finishing.
7. WIRE Solders Diameters 20ga - 0.032" - 0.81mm / Lengths: 12" JETS Product # 1925-45331
SOFT/EASY SPECIFICATIONS:
- Solder: Silver Content of 65%
- Melt temperature: 1,240°F - 671°C
- Flow temperature: 1,325°F - 718°C
MEDIUM SPECIFICATIONS: -
- Solder: Silver Content of 70%
- Melt temperature: 1,275°F - 691°C
- Flow temperature: 1,360°F - 738°C
HARD SPECIFICATIONS: -
- Solder: Silver Content of 75%
- Melt temperature: 1,365°F - 741°C
- Flow temperature: 1,450°F - 788°C
8. SHEET Solders Measure: 1" x 1" Square - Weight 1Dwt – 1.5Gr JETS Product # 1925-45223
SOFT/EASY SPECIFICATIONS:
- Solder: Silver Content of 65%
- Melt temperature: 1260o F - 682oC
- Flow temperature: 1,325°F - 718°C
MEDIUM SPECIFICATIONS: -
- Solder: Silver Content of 70%
- Melt temperature: 1,295°F - 746°C
- Flow temperature: 1,360°F - 738°C
HARD SPECIFICATIONS: -
- Solder: Silver Content of 75%
- Melt temperature: 1,375°F - 746°C
- Flow temperature: 1,450°F - 788°C
Silver Solder / 5% Silver Solder Brazing Rods / Silver Soldering Rod
Hard Jewelry Solder and Flux Jewelry Soldering Tools & Supplies
Jewelry Soldering Kit In Jewelry Soldering Tools & Accessories for sale
Jewelers Equipment Tools and Supplies
Jewelry Soldering Kit Flux Ceramic Silver Solder Board Third Hand Pick Tweezers
Jewelry Soldering Kit Ceramic Board Silver Solder
Soldering Board - Jewelry soldering, Jewelry making, Jewelers
Suitable Size: the size of the honeycomb ceramic soldering board is about 5.28 x 3.66 x 0.5 inches/ 13.4 x 9.3 x 1.3 cm, which are suitable to use on
Seajan Soldering Block Honeycomb Ceramic Soldering Boards Jewelry Soldering Kit Reverse Lock Tweezers Solder Plate for Jewelry Making Tool Soldering
CERAMIC BOARD SOLDERING HEAT PLATE JEWELRY BENCH 6x6 SQUARE TILE 1 THICK $19.79 - PicClick
Hand Soldered Silver
Quality material: this honeycomb panel is made of purity quartz, resistant to acid and and flame, without or combustible, and can withstand high
2 Pieces Honeycomb Ceramic Soldering Boards Soldering Honeycomb Panel Jewelry Soldering Block Making Tools Soldering Parts for Melting Casting Gold
Harris Stay Brite Soldering Kit - Findings Outlet
Jewelry Soldering Kit Torch Pickle Pot Tools Solder Supplies Repair Jewelry
Soldering Kit/Tweezers/ceramic board/ Third Hand/pick/Jewelry making kit
Jewelry Crafts Soldering Tools Kit Ceramic Solder Board Third Hand Pick Tweezers