Beni Red a red based bright red pigment and part of our Glow Series line. Our popular mica powder is ideal for DIY craft use, such as, epoxy, resin, woodworking, pen blanks, plastics, slime, watercolors, cosmetics, fishing lures, bath bombs, jewelry, acrylic, polish, candle making, and MUCH more.
ALWAYS TEST BEFORE FULL APPLICATION
DESCRIPTION
Beni Red is a Red based pigment and part of our Glow Series line.
Expose the Glow in the Dark pigments to light in order to charge the pigments.
GLOW TIME PER CHARGE - Unlike other brands, our Glow in the Dark pigments should last 8-10 hours per charge.
Mixing other pigments with the Glow in the Dark pigments will work BUT they will significantly decrease the ability to glow.
Compared to normal pigments, Glow in the Dark pigments have a heavier density and requires a smaller jar which may make it appear there's less.
Glow in the Dark mica powder is ideal for DIY craft use, such as, epoxy, resin, woodworking, pen blanks, plastics, slime, watercolors, cosmetics, fishing lures, bath bombs, jewelry, melt and pour, acrylic, polish, candle making, and MUCH more.
INGREDIENTS & PARTICLE SIZE
Particle size 30-50 μm
Ingredients Strontium Aluminate, Polyurethane-11, Red 28
Heat Threshold 752 °F - 1112 °F
MIXING TIPS FOR NEONS
Are you having a difficult time mixing the pigments or just find yourself stirring and stirring? Or even worse, finding tiny specs in your finished product? This is mostly the cause of not mixing and breaking down the pigment enough.
Due to the granular nature of specialty pigments such as neons, glow in the dark, etc. these pigments are typically a little more difficult mix and breakdown.
If this is the case, place the pigments in a small cup, use denatured alcohol and wet the pigments, stir until it has a consistency of a paste. Stir until they break down.
Although this video shows neon pigments, the same process can be used for Glow in the Dark pigments. HERE
ADDITIONAL DATA
Product Type
Mica
Vegan
Yes
Soaps
Yes
Epoxy Resin
Yes
Acrylic
Yes
FDA-Permitted for External Use
Yes
FDA-Permitted for Eye Area Use
No
FDA-Permitted for General (Including Lips) Use
No
FDA-Permitted for Bath Bombs Use
No
NOTE: External use applies to facial make up and nail polish. Bath Bombs fall under the Lips category.
We are always asked if our pigments can be used for cosmetic purposes. Below you will find some additional information on FDA Regulations.
FDA: Fact Sheet: Color Additives and Cosmetics
FDA: Color Additives Permitted for Use In Cosmetics
EPOXY RATIOS
Epoxy
2 grams per 8 ounces
The most common question that we receive is How much pigment per gallon of epoxy?. This is a very valid question and unfortunately there is no set answer due to the numerous types of applications and variations. This is why we recommend the 2 grams per 8 oz and add as desired.
For example:
Are you looking for an opaque or transparent look?
Lighter colors may take more pigment to achieve the color.
Why micron sizes matter:
PLEASE be aware of the micron sizes of the pigment. The larger the micron, the larger the particle.
Typical pigments average 10-60um.
Be aware that larger micron sized pigments will most likely have a heavier density which will cause the pigment to sink faster in fresh epoxy such as deep pours.
For example, our Icicle or 14k Nugget Gold is 200-700um and will most likely sink in fresh epoxy faster.
To alleviate sinking either let the epoxy settle up a little bit. Or, come back through your project to stir it a little more.
SOAPS RATIOS
Soap - Cold process
2 tsp per lb of oils
Soap - Hot process
½ tsp lb of MP base
NOTE: Due to the white MP base, it will always create a pastel color.
AUTOMOTIVE / REMOVABLE PAINT RATIOS
DO NOT use for these applications. Neon pigments are not UV resistant and will fade over time under constant UV (sun) exposure.
ACRYLIC POURING RATIOS
ALL MEASUREMENTS BY VOLUME
Courtesy from our friend Justin Salley.
For more tutorial visit his page HERE.
STEP #1- MIX YOUR POURING MEDIUM
3 parts Behr8300 Deep Base Interior/Exterior Hi-Gloss Enamel. 1 part JOSONJA Polyurethane Water Based Gloss Varnish.
Mix gently folding paint and varnish together until they are completely mixed, Go Slow to reduce mixing bubbles.
STEP #2- DISPERSING PIGMENTS INTO YOUR MEDIUM
Pour 1/2 to 1 teaspoon of JOSONJA Gloss Varnish into mixing container. Add around a teaspoon of Pigment (I generally add a little more) into your container with the JOSONJA. Mix until all Pigments have dissolved into a liquid making sure to stir any clumps out at this time.
STEP #3- COMBINING YOUR POURING MEDIUM & DISPERSED PIGMENTS
Add around 3 Tablespoons of Pouring medium into your Dispersed Pigments. Mix thoroughly being slow and folding rather than whipping, this will minimize the air bubbles.
STEP #4- WHAT IF?
-If your new mixed color seems to thick- Add a small amount of JOSONJA and stir until you reach the desired consistency.
-If your new mixed color seems to thin- Add a small amount of Behr8300 (ONLY) and stir until you reach the desired consistency.
INDUSTRIAL, PLASTICS, & GLASS COATINGS RATIOS
Vinyl Wrap And Plastic Films
5-10% By Weight
Plastic Bottles
1-2% By Weight
Masterbatch
10-30% By Weight
Plastic Resins
0.2-0.5% By Weight
Rubber Polymers And Latex
5-15% By Weight
Glass
1-10% By Weight
Candles
5-10% By Weight
GRAPHIC INKS & SCREEN PRINTING RATIOS
Flexographic Inks (Packing Materials)
15-25% By Weight
Offset Printing Ink
5-10% By Weight
Screen Printing And Screen Inks
10-30% By Weight
Textile Printing And Textile Inks And Pastes
5-10% By Weight
Gravure Inks
5-15% By Weight
COSMETICS RATIOS
Nail Polish
5-25% By Weight
FIREARMS (CERAKOTE) RATIOS
Photo Courtesy: crawlinzx14 / Picture shows Eye Candy Colorshift over a black base.
Our pigments can be used for both Cerakote and KG Gunkote clears. Below is just some references.
5 grams of pigment per 4oz
Typically recommend a black base. For light colored pigments such as yellows, pinks, etc. you may want to try a light colored base. ALWAYS test before full application.
3 coats for full saturation. Some colors may require less.
Stay with pigments with a 10-60um micron size. All particle sizes are listed on our product pages or you can find it on our Pigment Information List HERE.
Recommend using a .80 spray nozzle. Some use 1.0 for clears.
REQUEST SAFETY DATA SHEET (SDS)
To request a safety data sheet, please contact us here: Jeff@eyecandycustomz.com
ALWAYS TEST BEFORE FULL APPLICATION, DESCRIPTION, UFO GREEN is a beautiful bright green pigment and part of our Neon Series line. Our popular mica
UFO Green
Satori White Paste / 3 oz. – Eye Candy Pigments
Eye Candy Pigments - Aoi Hi Blue
Eye Candy Pigments Barney Purple 5 Grams
Eye Candy Premium Mica Powder Pigment Aki Bronze (50g) Multipurpose DIY Arts and Crafts Additive
Eye Candy Pigments
Eye Candy Mica Powder Pigment Senshi Red (25g) Multipurpose DIY Arts and Crafts
Eye Candy Pigments Barney Purple 5 Grams
✅ MULTIPURPOSE COLOR SHIFT MICA POWDER – Akebi is a beautiful Violet to Blue colorshift pigment. Our popular colorshift mica powder is ideal for DIY
Eye Candy Premium Mica Color Shift Pigment PowderAkebi (25g) Multipurpose DIY Arts and Crafts Additive | Epoxy, Resin Art, Nail Polish, Paint
Eye Candy Mica Powder - Neon Pigment - Colorant for Epoxy - Resin
Eye Candy Premium Mica Powder Pigment Kin Gold (25g) Multipurpose DIY Arts and Crafts Additive
Eye Candy Pearls Pigments Variety Mica Pigment Powder Set A - Epoxy Resin Art - Woodworking - Cosmetic Grade Mica Powder - Bath Bombs - Pigment