NOTE: All Ecofreen films are NOT compatible with STS Mutoh Printers and Prestige High Viscosity DTF Ink Ecofreen Premium Plus film has now been upgraded to Ecofreen Ultimate film at no additional cost. Features: After baking the powder, solid white for more vibrant colors. Even and regular particles for the fine qualit
NOTE: All Ecofreen films are NOT compatible with STS Mutoh Printers and Prestige High Viscosity DTF Ink
Ecofreen Premium Plus film has now been upgraded to Ecofreen Ultimate film at no additional cost.
Features:
After baking the powder, solid white for more vibrant colors. Even and regular particles for the fine quality of graphic and good adherence. Finely coated film for no pinholes!
Sizes:
11.8 x 109 Yard (30cm x 100m) (Pack of 2)
13 x 109 Yard (33cm x 100m) (Pack of 2)
16 x 109 Yard (40.64cm x 100m) (Pack of 1) - NOT Compatible with DTF Station Seismo A16 Powder Shaker
23.6 x 109 Yard (60cm x 100m) (Pack of 1)
Instructions:
Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
Apply hot melt powder evenly and remove the excess powder. Use a Seismo Shaker unit - like the Seismo S20 - to apply powder with ease!
Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315 °F, 1min).
Transfer the image by heat press at 330°F for 15sec with medium pressure.
After the first press, Option 1: Wait for 4-6 seconds and remove the film gently Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently
Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.
WARNING
Powder should NOT be applied on the printer platen. It needs to be applied AWAY from the printer. Application near the printer increases the risk of printer damage if the printer breathes in the adhesive powder into the intake fan by the electronics near the back of the machine. Damage to the printer for inappropriate use may not be covered under warranty.
Please wear Personal Protective Equipment (eyeglasses, mask, and gloves) when working with DTF products. The fumes from curing the powder can be hazardous.
NOTE
DTF (Direct To Film) products works with almost all types of fabrics including 100% polyester with good quality results!
Transfer Film does not require pre-treatment and it uses minimum 75% less DTG inks on to get good quality.
The designed fabrics or printed shirts have a good wash characteristics.
The fabric has very slight hand feel touch.
The process is much faster than Vinyl printing (Vinyl Printer).
NOTE: DTF Station Film A3 and A3+ Sheets and A3+ (13) Rolls have returned to their normal pricing, after a temporary price decrease.
DTF Station Warm Peel DTF Film Rolls
Direct to Film Accessories, Film
DTF Transfer Film Roll 13 x 328' (A3+) - GLOSSY Cold/Warm Peel – Kingdom DTF
Direct to Film Supply · Ecofreen
Kodacolor FTF (Film to Fabric) DTF Direct to Film Cold Peel Transfer Films - Kodak (Roll)
Ecofreen Transfer Film (Hot Peel) for Direct to Film
Direct to Film Printer · Ecofreen
Ecofreen Transfer Film (Hot Peel) for Direct to Film - 109 Yard Roll
Direct to Film Printer · Ecofreen
Discontinued - DTF Supply Bundle - 11 Roll – DTF Station
Ecofreen DTF Hot Peel Film - Roll – DTF Station