hydroflow eco resin is an environmentally friendly, water based casting compound that comes in two components - a natural powder and a water based acrylic binder. A sustainable solution for creating functional & decorative items with a cement texture & appearance. Can be used to make smooth or textured pieces.
hydroflow eco resin is an environmentally friendly, water based casting compound that comes in two components - a natural powder and a water based acrylic binder.
A sustainable solution for creating functional & decorative items with a cement texture & appearance. Can be used to make smooth or textured pieces.
Drys in less than an hour!
Water based and environmentally friendly eco resin
Beautiful natural vanilla color or tint with water based resiTint Acrylic Inks!
No harsh chemicals, odorless and VOC-free
Perfect for coasters, planters, architectural pieces, set design, cosplay
Ideal for creating textured art pieces on canvas and wooden boards
Create the terrazzo effect, easily sanded to create different finishes
Wash tools off with water after use
Non flammable (internal tests), Strong when dry
How to use
Specifications
Mix ratio
2.5 parts powder to 1 part liquid activator
Drying time
Approx. 30 minutes, demold in 1-2 hours, can be sanded after 2 hours
Pot Life
10-20 minutes
Shelf life
6 months
Adding colorUse any water-based pigment resi-Tint acrylic inks, acrylic paints or powdered tempura paints. Any solid can be added (sand, mica, quartzite, dried shards of hydroflow etc).
When using the whole kitAdd color to the hydroflow activator fluid before adding the powder. Add small amounts at a time and mix in stages until you have achieved a lump-free consistency
When using part of the kitPour the desired amount of hydroflow activator fluid into your mixing container. Add color to the hydroflow activator fluid before adding the powder. Add 2.5 times the amount of powder to the fluid activator E.g. if you started with 100ml (100g) activator fluid then you should add 250g powder. 2.5:1 is the default mixing ratio, but this is not set in stone. You can adapt the ratio with less or more powder to obtain a runnier or thicker consistency to suit the application. If the mixture is too viscous and thick for your application simply add a little water (5-10% by weight), the activator is a water based emulsion and can be extended and diluted further to make it more fluid.
Once you have mixed to a creamy consistency you can top up the pigment addition to achieve a stronger color shade.
Application
Immediately pour into your mold and agitate to clear trapped air bubbles. Allow to harden in 20-40 minutes. The mold will feel warm, this is normal. Demold after 1-2 hrs.
Additional information
hydroflow
can be sanded using either dry or wet/dry sandpaper to expose any terrazzo aggregate
is heat resistant up to 125°C surface contact temperature
is porous and can be sealed naturally with beeswax or by brush using any acrylic sealer
Hydroflow Water Based Casting Compound
Hydroflow eco-casting medium, (Jesmonite alternative) 7kg 2 part kit (2.5:1 ratio), Fast cure 1hour, (2L Liquid, 5Kg powder) Odorless water based non-toxic, terrazzo or smooth use : Arts, Crafts & Sewing
This casting compound is made from 2 components: mineral powder, and water-based acrylic binder. It is environmentally friendly and can be used to
hydroflow | Water Based Casting Compound — eco resin
Eco Resin, hydroflow Water Based Casting Compound
Hydroflow Water Based Casting Compound
hydroflow eco resin is an environmentally friendly, water based casting compound that comes in two components - a natural powder and a water based
hydroFlow Eco-Casting waterbased Eco Resin Kit, base & activator
hydroflow eco resin is an environmentally friendly, water based casting compound that comes in two components - a natural powder and a water based
hydroFlow Eco-Casting waterbased Eco Resin Kit, base & activator
hydroflow eco resin is an environmentally friendly, water based casting compound that comes in two components - a natural powder and a water based
hydroFlow Eco-Casting waterbased Eco Resin Kit, base & activator
hydroFlow Eco-Casting waterbased Eco Resin Kit, base & activator – ResinLifeUSA
Hydroflow eco-casting medium, (Jesmonite alternative) 3.5kg 2 part kit (2.5:1 ratio), Fast cure 1hour, (1L Liquid, 2.5Kg powder) Odorless water based non-toxic, terrazzo or smooth use : Arts, Crafts & Sewing