Material Specification: PU Composition Thickness: 210 Microns / 8.25 Mils (Please make sure plotter is capable of cutting such thickness) Heat pressure sensitive backing Chameleon Color Shift Finish Application Instruction (Home Iron) Set iron dial between Cotton and Linen Cover design with Kraft paper or non-stick cov
Material Specification:
PU Composition
Thickness: 210 Microns / 8.25 Mils (Please make sure plotter is capable of cutting such thickness)
Heat pressure sensitive backing
Chameleon Color Shift Finish
Application Instruction (Home Iron)
Set iron dial between Cotton and Linen
Cover design with Kraft paper or non-stick cover sheet
Place on flat, hard surface (ironing board not recommended)
Press iron with medium/firm pressure (do not slide iron)
Press each section of design for-15 seconds
If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
let it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.
Application Instructions (Heat Press)
Cut in reverse
Weed excess material
Preheat all fabric prior to pressing for best results
Apply design at 305°F/150°C-160°C for 12-15 seconds
let it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.
Applies to:
100% Cotton
Poly / Cotton Blends
100% Polyester
Leather
Laundering:
Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent (Max 60°C)
Dry on normal dryer setting
Do not bleach or dry clean
Note: Material will be rolled for shipment. Due to the nature of the material, wrinkles might appear after unroll. In this case, peel off the transfer tape (clear film) and re-apply transfer tape onto the film with heavy flat item on top such as yellow page for 15 minutes, the film will be back to the flat shape.
VINYL FROG Chameleon Heat Transfer Vinyl Bundle 6
Chameleon Vinyl Roll
Color Change Fabric
HTVRONT 12 inch x 10ft White to Red Chameleon Heat Transfer Vinyl Gradient Change Color Iron on Vinyl for Cricut, Size: 12x10ft
Chameleon HTV
DecoFilm® Brilliant Chameleon –
Chameleon Vinyl Roll
Color Change Fabric
Chameleon Heat Transfer Vinyl – Ahijoy
Material Specification:, PU Composition, Thickness: 210 Microns / 8.25 Mils (Please make sure plotter is capable of cutting such thickness), Heat
ESSMO™ Green/Gold Chameleon Color Change Heat Transfer Vinyl HTV ADC01
Gloss Light Green 3M 2080 Series G16 Car Vehicle Vinyl Wrap
Intense Blue Gloss Glossy Car Vehicle Vinyl Wrap Sticker Decal Air
HTVRONT 12 inch x 10ft White to Red Chameleon Heat Transfer Vinyl Gradient Change Color Iron on Vinyl for Cricut, Size: 12x10ft
Chameleon SpecialtyPSV