TFCFL Adhesive Dispenser Hot Melt Glue Gluing Dispensing Machine X001  3KG/HR 900W

TFCFL Adhesive Dispenser Hot Melt Glue Gluing Dispensing Machine X001 3KG/HR 900W

4.5
(499)
Write Review
More
$ 223.50
Add to Cart
In stock
Description

Arrives by Thu, Feb 1 Buy TFCFL Adhesive Dispenser Hot Melt Glue Gluing Dispensing Machine X001 3KG/HR 900W at

Hot melt glue dispensers are widely used in: toys (bonding, fixing, wiring, insulation), sealing. Packaging; handbags skin bags; small appliances. Wires. Connectors. Connectors; audio. Photo frame: identification labels; Small paper products are bonded and fixed; small ornaments, crafts, hairpins, water polo, etc.; electronic products are fixed. Adhesive. Insulation; other manual or semi-automatic use of glue is required.

Features:

Model: X001

Power: 900W

Sol speed: 3KG/HR

Solvent capacity: 3KG/HR

Maximum viscosity; 10000 CPS

Working temperature: 160-180 degrees centigrade

Temperature control range: 0-300 degrees centigrade

safety precaution:

Always wear safety gloves, goggles, and long-sleeved overalls to avoid burns from hot liquid hot melt adhesive

1. The gas circuit should avoid too much water vapor entering

2. The hot melt adhesive capacity must not exceed seven points of the capacity of the storage bucket.

3.The maximum total air pressure is set to 4KG

4. Before heating the melted glue, the pressure of the storage bucket must be released first.

Preparation for operation

1. Confirm the safety protection measures

2. Check if the machine is 110VAC and there is no fluctuation in the pressure

3. See if the temperature of the plastic bucket is set at about 170 degrees (different hot melt adhesives have different softening points. For specific setting values, refer to the data provided by the hot melt adhesive supplier)

5. Check whether the foot switch is connected and whether any conductive objects have touched the components in the electric control box.

6. Check if the air supply system is basically dry and the air pressure is stable

7. Power on and test the circuit of each part.

Boot steps

1. Connect the power and turn the power switch to ON

2. Check if the temperature of the temperature controller is within the above range

3. Check whether the pressure relief is turned in the direction of pressure holding

4. Connect the origin, set the pressure value, and start the operation

Shutdown steps

1. Release the foot switch to cut off the main power

2. Disconnect the air pipe, or adjust the pressure regulating valve of the filter cup to 0

NOTE:The product needs to be used with an air compressor

TFCFL Adhesive Dispenser Hot Melt Glue Gluing Dispensing Machine X001 3KG/HR 900W

Automatic Gluing Coating Dispenser 5L 10L PUR Hot Melt Glue Stick Machine for Cloth Paper Glass Adhesive Filling Machine - China Automatic Dispensing Robot, PUR Glue Dispensing Machine

Fetcoi Commercial Hot Melt Glue Spray Injecting Machine, 900W Semi-automatic Adhesive Hot Glue Gun Dispenser Equipment for Industries, 10000 CPS : Tools & Home Improvement

Cordless Fast Preheating Hot Glue Gun Kit with 30pcs Glue Sticks (7mmx150mm), USB Rechargeable & Smart Power-Off Cordless Hot Melt Glue Gun for

Hot Melt Glue Gluing Machine 0-300°C Adhesive Dispenser Equipment Tool Blue For Toys Bonding X001 900W 110V - AliExpress

How to use TBK-983B Automatic Glue Dispenser Machine?

900W Hot Melt Glue Spraying Gluing Machine Adhesive Injecting Dispenser Equipment : Tools & Home Improvement

Cordless Fast Preheating Hot Glue Gun Kit with 30PCS Glue Sticks (7mmx150mm), USB Rechargeable & Smart Power-Off Cordless Hot Melt Glue Gun for Quick Repairs, DIY & Xmas : Tools

Hot Melt Glue Machine

NEWTRY Automatic Digital Glue Dispenser System Time Setting Controller Kit+Stainless Steel Pressure Tank(Customizable)+Suction Two-fluid Dispensing Valve

Fetcoi Commercial Hot Melt Glue Spray Injecting Machine, 900W Semi-automatic Adhesive Hot Glue Gun Dispenser Equipment for Industries, 10000 CPS : Tools & Home Improvement