Kit Includes: DTF Station Phoenix Air 16 x 20 Curing Oven for DTF DTF Station Transfer Film for Direct to Film - 14" x 16" Sheet / 200 DTF Station Hot Melt Powder for Direct to Film Price: $1,193.58 / Saving: $298.40 Made specifically for DTG Printer users to take advantage of the power of DTF printing, this bundle has
Kit Includes:
DTF Station Phoenix Air 16 x 20 Curing Oven for DTF
DTF Station Transfer Film for Direct to Film - 14 x 16 Sheet / 200
DTF Station Hot Melt Powder for Direct to Film
Price: $1,193.58 / Saving: $298.40
Made specifically for DTG Printer users to take advantage of the power of DTF printing, this bundle has all the equipment and supplies you'll need to DTF with DTG.
Individual product descriptions
DTF Station Phoenix Air 16 x 20 Curing Oven for DTF
Phoenix Air 16x20 Operation Manual
Note: It is recommended to turn on the air purifier ONLY while the oven timer is running. Leaving the air purifier on for prolonged periods of time may increase the overall temperature of the oven beyond recommended curing temperature.
The Phoenix Air 16x20 Curing Oven is perfect for curing large film sizes, such as 13 x 19, 14 x 16, 16 x 20, and more! This oven comes with a purifier unit built-in to ensure the safety of your production space. It has a digital control unit that is easy to set and allows precise settings of temperature and time for consistent results. A fusing process is started at the touch of a button. After the set time has elapsed, an acoustic signal sounds alerting you to remove the transfer film.
Note: Unlike the previous Phoenix 16x20 Curing Oven, the Phoenix Air 16x20 oven uses an open-top/platform, rather than a tray, to cure films. See the Phoenix A3+ Curing Oven and A2 Curing Oven for similar heating methods.
Phoenix Air 16x20 Curing Oven can be bundled with the Prestige A3+R DTF Printer.
Features:
Cure Transfers within a minute at 230~248°F
Bottom Heating Element Rather than Top
Self Contained Purification system
Replace Filter 1~3 months depending on usage
Benefits:
Easy to use
Built-in purifier - save space & money
What's Included:
Handles come unassembled
Power cord
Training Video
Warranty Policy
Lifetime Tech Support*
*Only for active customers who have purchased DTF inks or supplies within the last 2 months
Specifications:
Voltage: 110V
Power: 0.88KW
Temperature Range: 0-150°C / 300°F
Machine Size: 29W x 21D x 7.75H
Packaging Size: 31W x 25D x 10.75H
Product Weight: 30 lbs
Packaging Weight: 35 lbs
----------------------------------------
DTF Station Transfer Film for Direct to Film - 14 x 16 Sheet / 100
DTF Station Warm Peel Film - SheetsFeatures:
High Ink Loading Layer: You can lay down more color / white to create rich colored decorated DTF prints.
Hot Peel: Peel off the film without a long wait after the first press.
Single Side Matte: Easily distinguish the print side.
Different DTF Film Sizes: Available in A3 (11.69x16.5) and 14x16
Compatible with any DTF printer on the market
Instructions:
Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
Apply hot melt powder evenly and remove the excess powder. Use a Seismo Shaker unit - like the Seismo S20 - to apply powder with ease!
Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315 °F, 1min).
Transfer the image by heat press at 330°F for 15sec with medium pressure.
After the first press, Option 1: Wait for 4-6 seconds and remove the film gently Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently
Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.
----------------------------------------
DTF Station Hot Melt Powder for Direct to Film
Hot Melt Powder Material Safety Data Sheet
Formulated for use during DTG Transfer (DTF), DTF Station adhesive powder is a crucial part of any DTF printing pipeline. Cover your DTG Transfer media with this powder to allow for optimal press. Use for 100% cotton, polyester, nylon, and more!
Features:
After baking the powder, solid white for more vibrant colors
Even and regular particles for quality graphics and good adherence
Finely coated film means no pinholes!
Sizes:
1 lb
1 kg
20 kg
Instructions (for use with DTF Station Warm Peel film):
Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
Apply hot melt powder evenly and remove the excess powder. Use a Seismo Shaker unit - like the Seismo S20 - to apply powder with ease!
Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315 °F, 1min).
Transfer the image by heat press at 330°F for 15sec with medium pressure.
After the first press, Option 1: Wait for 4-6 seconds and remove the film gently Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently
Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.
*This product has no affiliation with Epson and is not endorsed by Epson.
*Settings and directions to print DTF with your F2000/2100 using Garment Creator*
The basic concept for DTF is to print CMYK first then WHITE on top of it. ALWAYS MIRROR YOUR IMAGE FIRST!
Most of you will be printing onto standard A3 and A4 sheets. Utilize every inch of space as you can to save on time and cost of materials. We call that gang sheeting. One benefit of GC is that it allows multiple images to be uploaded at the same time for printing. Those who order Plastisol Transfers will already know this. The two most common platens I use are 10 x 12 (A2) and 16 x 20 (A3). I place the sheet towards the top middle as a guide and measure how much empty space I have on the sides and bottom because the sheets will be smaller than your platen. I use tape to hold in at least 2 corners to prevent the sheet from shifting while printing.
Using GC for DTF is very much the same as with DTG. The only difference is you are reversing the cmyk/white color process and mirroring your image.
If your image has black in it then click on Black Garment. That will prevent GC from printing black unnecessarily.
For all other colors including white, use (Dark Color).
After selecting the proper color choice, you need to tinker with your color and white levels. For me personally I use level 2 for color and level 1 for white. I leave ink density to zero. And make sure you leave enough time in between passes in Pause between Passes (sec). This is very important. I like to choose 30-60 seconds
Under White Management it is very important to check “OFF” first before you print your CMYK pass. This will allow your color layer to go down first.
After your color pass is done then you go back to white management and click “ON”. Be sure you have enough seconds in your “Pause between passes (sec)” or else your printer will print another CMYK pass right after your white pass. YOU DO NOT WANT THAT! So you MUST manually press cancel on your printer before it does so.
Unfortunately, Garment Creator was not designed for DTF so it is necessary to turn white on and off for every print you do.
WARNING
Powder should NOT be applied on the printer platen. It needs to be applied AWAY from the printer. Application near the printer increases the risk of printer damage if the printer breathes in the adhesive powder into the intake fan by the electronics near the back of the machine. Damage to the printer for inappropriate use may not be covered under warranty.
Please wear Personal Protective Equipment (eyeglasses, mask, and gloves) when working with DTF products. The fumes from curing the powder can be hazardous.
KASYU DTF Transfer Powder Film Kit for DTF Sublimation Printer All
DTF with DTG Ultimate Bundle
DTF Direct to Film Printing
Hybrid DTF and DTG Bundles – DTF Station
Prestige A3+ R vs Prestige A3+ DTF Printer: Desktop DTF Printer
Hybrid DTF and DTG Bundles – DTF Station
What is the best direct to film transfer ink bundle you ask? It's the Prestige DTF Printer Basic Supply Starter Kit 1. Take 5% Off on all the basic
DTF Station Prestige DTF Printer Basic Supply Starter Kit 1
Seismo 11 DTF Powder Applicator and Dryer, NOTE: This product is discontinued and unavailable, but a replacement is expected next week., Seismo Shaker
Discontinued - DTF Station Seismo 11 DTF Powder Applicator and Dryer
30cm DTF Printer I Eyas 2 I Printomize America
Seismo 11 DTF Powder Applicator and Dryer
Prestige A3+ DTF Printer: How to Print Your First Transfer Start
Save $99 on your purchase of Optional set of:, Phoenix A2 (16x24) Curing Oven, (Optional) Purifier MINI, Phoenix A2 (16x24) Curing Oven,
Phoenix A2 Curing Oven for DTF - With Air Purifier
Uninet 1000 - Roll Fed DTF Printer (STARTER BUNDLE) - DTG Connection
Direct To Film (DTF) Printer Bundles on Sale
Save $99 on your purchase of Optional set of:, Phoenix A2 (16x24) Curing Oven, (Optional) Purifier MINI, Phoenix A2 (16x24) Curing Oven,
Phoenix A2 Curing Oven for DTF - With Air Purifier