Mfinity Ceramic Coatings use nano ceramic technology to coat surfaces. The nano ceramic coatings coat the surface, giving it extra protection against the elements. Mfinity protects from dust and dirt to ultra-violet rays. Nano-ceramic helps protect the surface of paint, glass, vinyl wrap, metal, plastic, or textiles.
White Cherry Scent
Preserve is a 20% ceramic (SiO2) based waterless wash Nano ceramic coating spray designed to provide maximum protection for all-ceramic coated & non-ceramic coated surfaces. Preserve cleans and adds a slicker and super hydrophobic effect that lasts up to four months on coated surfaces and up to 2 months on non-coated surfaces. Preserve can be used on any nano-ceramic coating brand that has previously been installed.
Uses
Preserve was formulated to be used to protect paint, plastic, and vinyl wrap.
Hydrophobic effect
Acts as a stand-alone coating on uncoated surfaces
Enhances the color & finish
Extends the lifespan of nano ceramic coating
Less maintenance
Application Instructions
Prior to application, make sure all areas to be treated are free of large dirt particles or grit. For best results, apply on a cool surface, out of the sun. Simply spray a generous amount of Preserve on the surface, fold a microfiber towel in fourths, and lightly wipe in straight lines to remove dirt. Alternate to a clean side of the towel when used section gets too dirty. To attain a streak-free, slick finish after all dirt is removed, use a fresh dry towel to buff away any residue.
Preserve will start to cure within 20 minutes. Allow product to cure & harden for 12-24 hours to achieve the longest possible protection. Every time you need to clean or detail - Preserve it.
Disclaimer
MFinity makes no expressed or implied warranty & accepts no responsibility for any direct or indirect damages since the seller has no control over handling or use once sold.
Mfinity Ceramic Coating for Vinyl Wrap is great for those looking to protect and enhance their vehicle's vinyl wrapped surface. MFinity Wrap can remain durable for up to 2 years. Wrap will make cleaning easier and will protect from contaminants and ultraviolet damage. Like all MFinity products, Wrap is very user-friendly. This coating leaves matte vinyl with a dulled appearance while enhancing gloss finishes.
Uses
Wrap was formulated to be used to protect the vinyl wrap and paint protection surfaces.
Super-hydrophobic effect
Reduces orange peel
UV resistant & weather resistant
Enhances the color & finish
Extends the lifespan of the film
Less maintenance
A 50 ML bottle can coat 4 to 7 sedans with a gloss finish wrap, 3 to 5 sedans with a satin finish wrap, or 2 to 3 sedans with a matte finish wrap.
Safety Instructions: 1. Keep out of reach of children2. Store at a cool dry place (<75 ºF)3. Don't Mix with other products4. Use a respirator and gloves during application
Application Instructions
Prepare the surface of your vehicle. Go over the surface with denatured alcohol to remove any residual oils.
Use a MFinity Applicator block with a Mfinity Microsuede Applicator wrapped around or the MFinity Pro Microfiber Applicator.
Shake the product well. Apply 6 to 8 drops to the applicator. Coat the entire pad so it is dampened with the coating.
Coat the entire panel in horizontal and vertical strokes. Make sure to coat the entire surface.
After 60 seconds smooth over the surface with a clean microfiber cloth using the same application technique and light, even pressure to remove any residual coating
Repeat step 5 after approximately 10 seconds with a second clean MFinity microfiber cloth to smooth out the surface.
Let cure for 30 minutes or less before next coating
If and when applying a second coat, use 2 - 3 drops of MFinity Wrap on the applicator pad.
Wrap will harden within 8 - 12 hours. However, full cure time is 3 to 4 days depending on weather conditions and temperature.
Wait at least 7 days after coating the surface before exposure to water, dirt, cleaners, or any other contaminants. Failure to do so may result in streaking and or staining.
View our tutorial on how to apply ceramic coating to your vehicle.
Disclaimer
MFinity makes no expressed or implied warranty & accepts no responsibility for any direct or indirect damages since the seller has no control over handling or use once sold.
Prepare is a heavy-duty, professional-strength, all surface cleaning agent. This product is specifically designed to aid in the removal of wax, oil, silicone, bugs, and other residues. Eliminating these contaminant layers is crucial for the successful application of vinyl wraps, paint protection, and ceramic coatings. Prepare’s advanced lubrication properties give the results of a smooth surface - free of marring - ideal for prepping any surface.
How to Use:
1. Shake container before application.2. Spray from a distance of approximately 1-2 feet.3. Wait for one minute to allow the formula to break down contaminants.4. Wipe clean with a microfiber towel.5. Repeat the process if needed.*For heavily contaminated surfaces, finish with isopropyl alcohol to assure all contaminants broken down by Prepare are removed.
WARNING: KEEP OUT OF REACH OF CHILDREN.
Always read instructions before use. May be harmful if swallowed. May cause skin & eye irritation. If swallowed please contact the poison control center or physician immediately. In case of eye contact, immediately flush with water, remove any contact lenses, continue flushing with water for 10 minutes. If irritation continues, acquire medical advice/attention.MFinity and MetroRestyling make no expressed or implied warranty & accept no responsibility for any direct or indirect damages as neither, MFinity nor MetroRestyling, have control over how this product is handled once sold.Safety Instructions:1. Keep out of the reach of children2. Store at a cool dry place (<75 degrees Ferenheight)3. Don't Mix with other products4. Use a respirator and gloves during application
Includes: One 16oz bottle
Application Instructions
Prior to application, make sure all areas to be treated are free of large dirt particles or grit. For best results, apply on a cool surface, out of the sun. Simply spray a generous amount of Prepare on the surface, and begin to wipe all dirt and contaminants away. Alternate to a clean side of the towel when the used section gets too dirty. Spray a light amount of isopropyl alcohol and use a fresh clean towel to buff away any remaining residue.
Disclaimer
MFinity makes no expressed or implied warranty & accepts no responsibility for any direct or indirect damages since the seller has no control over handling or use once sold.
MFinity Supreme 9H Nano-Ceramic Protective Paint Coating for painted surfaces is our flagship nano-ceramic protectant. Supreme can remain durable for 5 years. Supreme uses advanced nano-ceramic technology, giving it a high temp rating and self-cleaning features. Like all MFinity products, Supreme is very user-friendly. Supreme is the real deal if you're looking for the best in ceramic coating.
Uses
Supreme was formulated to be used to protect painted surfaces.
9H hardness
Thermal resistant up to 1500°F
UV resistant
Chemical resistant
Scratch-resistant
Super-hydrophobic effect
Prevents oxidation and corrosion
Self-cleaning
One bottle of MFinity Supreme can coat 3 to 5 sedans.
Safety Instructions:1. Keep out of reach of children2. Store at a cool dry place (<75 ºF)3. Don't Mix with other products4. Use a respirator and gloves during application
Application Instructions
Prepare the surface of your vehicle. Go over the surface with denatured alcohol to remove any residual oils.
Use a MFinity Applicator Block by wrapping it with a MFinity Microsuede or MFinity Pro Microfiber Applicator
Shake the product well. Apply 6 to 8 drops to the applicator. Coat the entire pad so it is dampened with the coating.
Coat the entire panel in horizontal and vertical strokes. Make sure to coat the entire surface.
After the initial application, smooth over the surface after 60 seconds with a clean microfiber cloth using the same application technique and light, even pressure to remove any residual coating
Repeat step 5 after approximately 10 seconds, with a second clean MFinity microfiber cloth to smooth out the surface.
Let cure for 30 minutes or less before next coating
If and when doing a second coating, only use two drops of MFinity Supreme on the applicator
Supreme will harden within 8 - 12 hours. However, full cure time is 3 to 4 days depending on weather conditions and temperature.
Wait at least 7 days after coating the surface before exposure to water, dirt, cleaners, or any other contaminants. Failure to do so may result in streaking and or staining.
Disclaimer
MFinity makes no expressed or implied warranty & accepts no responsibility for any direct or indirect damages since the seller has no control over handling or use once sold.
Mfinity's Ceramic Glass Coating is a nano-ceramic protectant. Like all MFinity products, Glass is very user-friendly. Glass has a contact angle of 117°. Rain is no match - water will bead and roll off the glass allowing you a clear and distant view. You will find yourself using your wipers less frequently. Glass can remain durable for up to 1 year.
Uses
Glass can be used on windows, windshields, side mirrors, shower doors, and any other glass or mirror surfaces.
7H hardness
Anti-icing
UV resistant
Easy to clean
Super-hydrophobic effect
Fills small scratches
One bottle of MFinity Glass can coat 4 to 6 windshields.
Safety Instructions:1. Keep out of reach of children2. Store at a cool dry place (<75 ºF)3. Don't Mix with other products 4. Use a respirator and gloves during application
Application Instructions
Prepare the glass with denatured alcohol and wipe clean
Wrap the MFinity Pro Ceramic Coating Applicator Block with the Microsuede Application Cloth.
Apply 3 to 4 drops for a one-foot area.
Rub the coating in using a crosshatch application (approximately 4 lines horizontal, 4 lines vertical).
Keep rubbing the coating in the crosshatch pattern until it looks totally buffed out.
Use a fresh microfiber towel to remove any extra coating.
Wait at least 7 days after coating the surface before exposure to water, dirt, cleaners, or any other contaminants. Failure to do so may result in streaking and or staining.
Disclaimer:
MFinity makes no expressed or implied warranty & accepts no responsibility for any direct or indirect damages since the seller has no control over handling or use once sold.
Mfinity's Ceramic Coating for Plastic is a nano-ceramic protectant that can effectively coat the majority of a vehicle. Total can remain durable for 3 years. Like all MFinity products, Total is very user-friendly. This product will not leave any harsh chemicals behind on your treated surface.
Uses
Total can be used to protect plastic, hard rubber, aluminum, paint, wheels, and chrome surfaces.
9H hardness
Thermal resistant from (-31°F - 1500°F)
UV resistant
Easy to clean
Super-hydrophobic effect
Brings out depth without changing the sheen
One bottle of MFinity Total can coat 3 to 6 sedans.
Safety Instructions:1. Keep out of reach of children2. Store at a cool dry place (<75 ºF)3. Don't Mix with other products 4. Use a respirator and gloves during application
Application Instructions
How to Apply 9H Nano Ceramic Coating
Prepare the surface of your vehicle. Go over the surface with denatured alcohol to remove any residual oils.
Use a MFinity Applicator Block with a MFinity Microsuede wrapped around or MFinity Pro Microfiber Applicator.
Shake the product well. Apply 6 to 8 drops on the applicator. Coat the entire pad, so it is dampened with the coating.
Coat the entire panel in horizontal and vertical strokes. Make sure to coat the whole surface.
After the initial application, smooth over the surface after 60 seconds with a clean microfiber cloth using the same application technique and light, even pressure to remove any residual coating.
Repeat step 5 after approximately 10 seconds, with a second clean MFinity microfiber cloth to smooth out the surface.
Let cure for 30 minutes or less before the next coating
If and when doing a second coating, only use two drops of MFinity Total on the applicator
Total will harden within 8 - 12 hours. However, complete cure time is 3 to 4 days depending on weather conditions and temperature.
Wait at least 1-2 days after coating the surface before exposure to water, dirt, cleaners, or other contaminants. Failure to do so may result in streaking and or staining.
Disclaimer
MFinity makes no expressed or implied warranty & accepts no responsibility for any direct or indirect damages since the seller has no control over handling or use once sold.
How Much Does It Cost To Do Ceramic Coating On A Car?
Replying to @Explicit_Erick_ Can you CERAMIC COAT wraps? #ceramiccoati, Ceramic Coating
Can You Put Ceramic Coating On Vinyl Wrap
BMW i8 - Color Change Vinyl Wrap (Before + After) — Wichita Clear Bra - Ceramic Coating, Paint Protection, Window Tinting & Detailing.
Ceramic Coatings For Cars Colorado Springs
This unique Ceramic formula will work on matte, textured and gloss films. Cleaning is a breeze! Water, dirt, grime and other contaminants will glide
FUSE VinylPRO Ceramic Coating for Vinyl Wraps
Flexible Film Coating for PPF - Martin Auto Detailing
Everything You Need to Know About Ceramic Coating
What Is Ceramic Coating, And How Does It Extend The Lifetime Of Your Car Wrap? - Wrap UK
Ceramic Wrap Coatings for Cars Mfinity Coatings – Tagged After Care
Does Vinyl Wrap Stick To A Ceramic Coated Car? By @ckwraps