Discover premium candle making supplies at Myka Candles & Moulds. From moulds to waxes, elevate your candle crafting experience. Shop now!
Exclusive to Myka Candles & Moulds and hand-poured in Australia using premium platinum-cure silicone. (Requires up to 1 week processing time)
This handmade mould is crafted from platinum-cure silicone and features a slit on both sides to assist with unmoulding. Platinum-cure silicone is known for its durability and high tear-resistance. It can withstand high temperatures up to 230°C, but it is not recommended to expose them to excessive heat for long periods of time. In comparison to regular silicone moulds, moulds made with platinum-cure silicone are more long-lasting and has a shelf life of more than 30 years.
To use, simply start by piercing a hole in the center of the mould where you want the wick to come out. Thread the wick through the hole and align the two sides of the mould together before securing with rubber bands. Pour in melted wax and allow it to cure overnight before carefully unmoulding the candle. For best results, preheat your mould with a heat gun prior to pouring to prevent jump lines and air bubbles getting trapped.
Please note that this mould is intentionally cut to make unmoulding easier. This, in turn, will leave a seam line on the candle, but it's appearance can be minimized by ensuring that both halves of the mould are aligned as perfectly as possible before usage.
Specifications
Finished product: 10cm (H) x 13cm (W) x 13cm (L)
Wax volume: 730g
Cotton wick recommendation: 24 ply
All measurements are approximate and will vary depending on the type of wax used and how much fragrance oil is added.
Mould Care
Clean with warm water and mild soap after every use and store in a dust-free environment. Do not over-stretch or use any abrasive tools or fingernails.
Disclaimer: mould is poured, trimmed, and cut by hand and therefore may have some imperfections.
Exclusive to Myka Candles & Moulds and hand-poured in Australia using premium platinum-cure silicone. (Requires up to 1 week processing time)
This handmade mould is crafted from platinum-cure silicone and features a slit on both sides to assist with unmoulding. Platinum-cure silicone is known for its durability and high tear-resistance. It can withstand high temperatures up to 230°C, but it is not recommended to expose them to excessive heat for long periods of time. In comparison to regular silicone moulds, moulds made with platinum-cure silicone are more long-lasting and has a shelf life of more than 30 years.
To use, simply start by piercing a hole in the center of the mould where you want the wick to come out. Thread the wick through the hole and align the two sides of the mould together before securing with rubber bands. Pour in melted wax and allow it to cure overnight before carefully unmoulding the candle. For best results, preheat your mould with a heat gun prior to pouring to prevent jump lines and air bubbles getting trapped.
Please note that this mould is intentionally cut to make unmoulding easier. This, in turn, will leave a seam line on the candle, but it's appearance can be minimized by ensuring that both halves of the mould are aligned as perfectly as possible before usage.
Finished product: 10cm (H) x 13cm (W) x 13cm (L)
Wax volume: 730g
Cotton wick recommendation: 24 ply
All measurements are approximate and will vary depending on the type of wax used and how much fragrance oil is added.
Clean with warm water and mild soap after every use and store in a dust-free environment. Do not over-stretch or use any abrasive tools or fingernails.
Disclaimer: mould is poured, trimmed, and cut by hand and therefore may have some imperfections.
Our acrylic candle moulds are an essential tool for anyone looking to create professional-grade candles at home. Made from acrylic plastic, these
Pointy Ribbed Pillar Mould
Australian Candle Moulds Supplier – Myka Candles & Moulds
Sale – Myka Candles & Moulds
Australian Candle Moulds Supplier – Myka Candles & Moulds
Myka Candles & Moulds
Wavy Vase Mould – Myka Candles & Moulds
Australian Candle Moulds Supplier – Myka Candles & Moulds
Our candle colour dye comes in pastille form and is a colouring agent for container candles, pillar candles, and wax melts. These high quality
Candle Colour Dye
Inspired by the ruins of Ancient Greece, these moulds look best as a set of 3 and will be the perfect addition to your collection. We recommend using
Ruins Mould