Ash Veneer Edgebanding

Ash hardwood veneer edgebanding. 10mil thick with two backing options, Hot-Melt Glue or Paper-Back. Cover any cheap plain wood to make it look like its made of solid ash hardwood.
Ash wood veneer edge banding Sold in three widths 7/8”, 1, and 2. Purchase by the 25 foot section or by the full roll. HM Glue full rolls are 250’. Full roll of paper back edgeband is 500’.  For multiple units purchased, the longest possible continuous piece will be sent.  If a specific length is required, please contact us. Felt/Paper Backer: This edgeband will adhere to most surfaces. Rough sanding is necessary on smooth surfaces before applying. It is recommended to apply a thin layer of contact cement to both the surface being covered and the edgebanding. The contact cement should be tacky before applying edgebanding to surface, this should only take a few minutes. Gently press edgeband onto the surface and work out any air bubbles with gentle pressure. Full roll with this backer is 500’. Hot Melt Glue Backer: A high quality EVA hot melt adhesive is on the back. There is no additional adhesive needed with this glue. This edgeband will adhere to most surfaces. Rough sanding is necessary on smooth surfaces before applying. Before applying hot iron, cover with cotton cloth. It is recommended to move the hot iron in a circular pattern until adhesive adheres to surface. Scorching will occur if hot iron is left too long in one spot. Full roll with this backer is 250’.

Wood Veneer Edgebanding - Metro Hardwoods

1mm/2mm x 100m Cherry Veneer Edgebanding Edging Tape Un-Glued – Uniboards

White Ash Edge Banding (Automatic), 4631047 (Edgemate)

0.6mm x 100m Cedar Veneer Edgebanding Edging Tape Un-glued

Uniboards

Model: Edge banding trim edging rolls hot melt adhesive Mpn: 6 x 120 x 1/40 = 6.0 x 10' x .025

White Oak Wood Veneer edgebanding 6 x 120 with preglued hot melt Adhesive

BIRCH NON-GLUED WOOD EDGEBANDING (1 1/4 TO 2

L:2.5Meters/pcs Width:58cm Thickness:0.25mm Technology Ash Wood

Model: Wood veneer edge banding rolls hot melt adhesive, Wood Type: Oak Brand: White Oak wood veneer edgebanding preglued roll Veneer Type: Preglued

White Oak Wood Veneer edgebanding 1-1/4 x 120 preglued Adhesive 1.25 x 1/40

Brand: Red Oak wood veneer edgebanding hot melt adhesive Model: Wood veneer edge banding Oak Red thin fleece back

Red Oak Wood Veneer edgebanding 3.25 x 120'' with preglued Adhesive (3-1/4)

Brand: Wood veneer edgebanding nonglued no adhesive roll Model: Wood veneer edgebanding nonglued no adhesive roll

Ash Wood Veneer edgebanding in 7/8 x 50' feet no Adhesive Fleece Back 1/40

Description White Ash Edgebanding or Edge Tape Banding is an excellent way to put the finishing touches on your projects. Known to be a beautiful

Ash Edgebanding