3D Speed – in2Detailing

3D Speed is a all-in-one correction glaze that will remove light to moderate scratches and swirl marks, leaving a wax protection behind. It’s easy to use, easy to apply and remove.You have many choices of pads you can work with a firm cutting pad. Use a heavy cutting pad if you like or a soft finishing pad.  It all dep

With Soft 99's Glaco W Jet Strong chemical liquid wiper, its double-jet nozzle and more powerful gas pressure allows the spray to reach long distances. That's why, even on a wide windshield, it takes only 3 seconds to complete the coating.

The durability of water repellency is increased by 50% compared to conventional repellents, which makes its effect last for a long time. The cap can be used to vent gas after use, and it can conveniently be taken apart and separated for disposal.

Directions for Use

1. If applied on dry glass: Wash the car thoroughly and prepare the windows with a dedicated product – Glaco Compound Roll On or Compound Z, then rinse and dry the windows.
2. Spray onto the windshield for about 3 seconds, making a Z-shaped motion.
3. Wipe off with a slightly damp towel or microfiber, spreading the agent on the windshield. Continue until the windshield is perfectly clear.

TIP: If applied on wet glass: spray onto the windshield for about 3 seconds, then turn on the wipers.

Size: 180ml

The Brake Cleaner is the ideal spray for cleaning and degreasing brakes, motor- and gear parts. It removes brake dust, smut, fat and oil emulsive arrears easily, quickly and effectively and features a good compatibility of materials.

• easy, quick and effective

Application

• Processing temperature min. 15 °C.
• Spray the parts to be cleaned vigorously.
• Allow the surface to flash-off. TIP: Do not spray on hot surfaces!

With the Brake Caliper Lacquer and the Brake Caliper Lacquer NEON you give your vehicle a very individual and sporty look. It permanently seals and preserves the surface and is chemical, corrosion and oil resistant. It has a long-lasting gloss and is easy to clean. With the included basecoat our Brake Caliper Lacquer NEON displays an exceedingly intense luminosity.

• 7 pieces set or 10 pieces set (for NEON colours)
• heat resistant
• chemical, corrosion and oil resistant
• easy and exact application with a paint brush
• no need to dismantle any car parts
• sufficient for 4 brake calipers
• Use NEON colours only with the included basecoat

The Brake Caliper Lacquer set includes:

• Brake cleaner, 400 ml and 125 ml paint as well as 50 ml hardener
• Steel brush, brush, spatula, 1 pair of disposable protective gloves

The DAS-6 PRO Dual Action Polisher v2 builds on the popular DAS-6 and offers even better performance.

This new model features a number of upgrades over the previous generation. It contains a more powerful 900w motor which delivers much more low end power.

In addition, the DAS-6 PRO features a rubberised front grip handle and counterweight shield. The bearings and gearing have been refreshed for an even smoother action, making this amongst the smoothest, easiest to use dual action car polishers on the market. The brushes have also been made so they can be changed externally making servicing the machine much easier.

The new machine now comes with a 3 (75mm) backing plate for those tighter areas and a high quality foam cutting and finishing pad.

The machine comes supplied with a UK 240v or EU 110v plug, is fully CE marked and has the peace of mind of a 1 year manufacturer’s warranty. Improvements include a heavy duty 6 meter cable and a D-Handle. A special embroidered canvas carry case is supplied with every machine, perfect for storing the machine and accessories whilst not in use.

The DAS-6 PRO has been fully re-engineered and is the most powerful Dual Action Polisher on the market. The results of this extra power are a machine that cuts almost as well as a rotary but with all the safety of a dual action. Unlike other machines at low speeds the extra torque is a real benefit for application of polish.

Dual action polishers are very popular with car enthusiasts and professionals alike as they are low risk but give much better results than polishing by hand. With a powerful 900w motor it is possible to removes scratches and swirl marks when used in conjunction with a polish. It is also a perfect for applying glazes, sealants and waxes.

Specifications:

• Orbit Size: 9mm
• Backing Plate Thread Size: 5/16
• Variable 6 Speed Dial: 2,500 to 6,500rpm
• Weight: 2.3kg (approx)
• Supplied with two Velcro Backing Plates Size: 125mm (5) and 75mm (3)
• Supplied with two foam pads: 1 x Green Correction and 1 x Blue Finishing
• Fits 3, 4, 5, 6 and 6.5 polishing pads

Key Features:

• Heavy Duty 900w Motor
• CE marked / 240v with UK plug or 110v with EU plug
• 6 Meter Heavy Duty Cable
• D-Handle
• Canvas Carry Case
• Aluminium Gear Housing Cover
• CNC Finished Gears
• Electricity Feedback Circuit
• 1 Year UK Manufacturer Warranty 

3D ONE Hybrid cutting compound and finishing polish accelerate polishing performance.  It has nano ceramic alumina abrasives that easily correct paint scratches by using a DA or high-speed rotary polisher.  3D One is a unique product: apply on a cutting pad to remove heavy scratches and then apply on a finishing pad to deliver an exceptional high gloss finish.  It’s easy to use easy to clean up and it leaves the perfect finish every time.  It works best when applied in a shaded area, but it is also sun-friendly.

3D Speed is a all-in-one correction glaze that will remove light to moderate scratches and swirl marks, leaving a wax protection behind. It’s easy to use, easy to apply and remove.

You have many choices of pads you can work with a firm cutting pad. Use a heavy cutting pad if you like or a soft finishing pad.  It all depends on the type a correction that you would like to make.

You will simply apply four dime sized drops to the pad. Make sure that you put your cord over your shoulder so you don’t scratch the car while your leaning on it.

You don’t have to worry about your plastics.

Rub the Speed correction wax into the surface of the car paint. On our 3D polisher or any dual action polisher set it to level four  or any speed you’re comfortable with and turn it on. Always start with the machine on the surface. What you’re going to do for more correction is move it slower across the surface. Very easy simple patterns, you don’t need to force the product down on the paint surface. Let it do the work for you. With 3D Speed you have a long open working time whether you are outdoors or in an enclosed area.

You can use a speed up to use 3D SPEED for correction. If you want to, you can apply 3D SPEED more as a wax.  Slow down the speed and it will turn into a wax. it’s just a swipe to remove using microfiber towel in a back and forth motion.

Remove all 3D Speed. Now the shine has been revealed, paint correction has been completed. You’ve DONE it! that’s all there is to it.

• Fastest body shop safe finishing polish
• Alpha Ceramic Alumina technology provides true paint correction
• Easy clean up, superior finish, no fillers
• Fresh paint safe, silicone-free, and water based

3D ACA 520 Finishing Polish is the next evolution product performance and finish quality results for the fine-cut polish category in the body shop and car detailing industry.

Our 3D AAT 502 Finishing Polish was our first finishing polish introduced in 2018 and it’s good… really good. But just like everything in our world is continually changing, Tunch Goren, the owner and head chemist at 3D Products came up with an even better abrasive technology for a new compound, ACA 510 Premium Rubbing Compound and a new polish 3D ACA 520 Finishing Polish.

This new formula requires more time and more complex steps to create the raw materials and process them into the final powder – Alpha Ceramic Alumina or ACA. If you’re new to paint correction chemistry lingo – the word powder refers to the abrasive technology.

Besides the powder, the other important components that result in a compound or polish are the liquids. The liquids are just as important as the powder because it is the liquids that determine how well or how poorly the powder performs in different applications, such as for use with ha rotary polisher and/or for use with an orbital polisher.

After much experimenting with a brand new and very complex processing technology, once Tunch Goren perfected the powder and the accompanying liquids he then blended these two components together to create 3D ACA 510 Premium Rubbing Compound and 3D ACA 520 Finishing Polish. The new global tag-team of body shop safe compounds and polishes.

Like ALL 3D products, 3D ACA 520 Finishing Polish contains no harsh, harmful solvents nor any OSHA regulated crystalline silica. 3D ACA 520 Finishing Polish is the fastest polish in the industry for producing hologram-free results. This proprietary Alpha Ceramic Alumina powder and the water-based formula reduce heat during the buffing process, offers a super long open time or buffing cycle, zero dusting and easy wipe-off. If you demand the best, then get 3D ACA 520 Finishing Polish.

3D on the outside of the bottle means you can trust the product on the inside of the bottle.

What is it? - A body shop safe, silicone-free, water based premium quality fine-cut polish for use on automotive paints in in body shops environments. Can be used with any rotary or orbital polisher with foam pads.

What does it do? - Quickly removes holograms, fine swirls, fine toweling marks, shallow scratches, water spots and oxidation. Maximizes the distinction of image or D.O.I. appearance quality of a paint finish. Perfectly prepares the paint for wax, sealant, or ceramic coating. 

When do you use it? - After first removing sanding marks with a 3D compound and/or after removing any serious or deep paint defects like swirls, scratches, water spots and oxidation.

Why use 3D ACA 520 Finishing Polish over other options? - The polishing step is the final step to perfect the paint. The results you create during all the steps are important but it’s the final polishing step where your product of choice has the chance to be the hero or the zero. Don’t be a zero… be the hero! Choose 3D ACA 520 Finishing Polish and the results you create will establish your reputation as a true professional in this industry and directly reflect your skill, knowledge, and talent.

3D ACA 520 Finishing Polish consistently delivers customer pleasing results sure to impress everyone. Did I mention it also wipes off easy? The next time you’re shopping for a better polish, make your job easy – choose 3D ACA 520 Finishing Polish.

• FASTEST fine-cut polish removes holograms, fines swirls and scratches.
• More correction, more speed and same finish results as 3D AAT 502 Finishing Polish.
• Precision engineered proprietary Alpha Ceramic Alumina, (ACA) abrasive technology.
• Chemically tuned for both hard and soft paints.
• Finishes out hologram free with rotary polisher and soft foam finishing pad.
• Works with both rotary and orbital polishers plus foam, microfiber, or wool pads.
• Body shop safe – Fresh paint safe – Silicone free!
• Does NOT contain OSHA regulated Crystalline Silica! - HUMAN SAFE
• Water-based – No harsh solvents or foul odors!
• Wipes off easy! – Won’t clog buffing pads –– Competitive pricing.
• 3D’s Green Earth Technology – Biodegradable, Prop 65 and V.O.C. compliant.

• Step 1 extra cutting body shop compound with foam or wool pad
• Cuts P1000 grit sandpaper or finer
• Removes sanding marks, deep scratches, oxidation, and water spots
• Levels car paint surface to create a more perfect finish

3D ACA 500 X-TRA Cut Compound is the wool pad version of 3D ACA 510 for shops that prefer and use wool pads when cutting with a rotary polisher.

When it comes to polishing paint, THE most important factor is the abrasive technology. Think about it? It is the abrasives that TOUCH the paint first, then the buffing pad. Behind the pad is the tool and behind the tool is the person.

3D Products is unique in ALL the world because our abrasive technology is unique to 3D. We make all our own powders, (powders mean abrasive technology), we go as far to make our own raw materials to make our own powders! There’s no other company that can make this claim.

Tunch Goren, the head chemist, founder and owner of 3D Products came up with this technology completely on his own after studying abrasive technology and formulations for over 25 years. Tunch’s passion is to continually create abrasive technology that is unlike no other abrasive technology in the world.

The process that Tunch Goren invented and manufactures in-house in Santa Clarita, California is unique – there are no other manufacturing plants on Earth with this capability.

3D on the outside of the bottle means you can trust the product on the inside of the bottle.

What is it? - A body shop safe, silicone-free, water based premium quality fast cutting compound for use with wool pads and rotary polishers to remove sanding marks in body shop environments.

What does it do? - 3D ACA 500 X-TRA Cut Compound is formulated and intended for use in body shops to remove sanding marks after wet sanding. It can also be used by detailers for paint correction including removing deep scratches, water spots, swirls, and oxidation. 3D ACA 500 X-TRA Cut Compound levels automotive paint surfaces to create a more perfect finish

When do you use it? - After wet sanding paint to remove the sanding marks or anytime you need to perform paint correction to remove serious and/or deep swirls, scratches, water spots or oxidation and prep the paint for the polishing step.

Why use 3D ACA 500 over other options? - Fast cutting, long buffing cycle, zero dusting and easy wipe-off – what’s not to like? Plus, 3D’s exclusive and even exotic Alpha Ceramic Alumina abrasive technology does not retain heat like conventional abrasive technology. This helps to keep surface temperatures low. 

Low buffing temperatures are important because unlike the misinformation that floats around the internet, heat is not good for clearcoats. You’re NOT supposed to heat-up clearcoat paint as a part of any buffing process although some people teach this as an approved practice.

Besides top-notch product performance, 3D keeps your safety as a top priority when formulating any product including all of our compounds, polishes, and all-in-ones. 

There is ZERO crystalline silica in 3D ACA 500 X-TRA Cut Compound just like there is zero crystalline silica in any of our products. Crystalline silica is a fine, glass particulate that floats in the air. It’s cheap and this is why it was commonly used in other brands of compounds, polishes, and all-in-one type products. 

Here at 3D, we have NEVER used crystalline silica in any of our products and we never will. We make products that are safe for you and the environment – this is how we roll at 3DProducts.com

• FAST cutting compound for removing sanding marks and other serious paint defects like swirls, scratches, water spots and oxidation.
• 3D ACA 500 X-TRA Cut Compound is specifically formulated for use with WOOL cutting pads with rotary polishers.
• Precision engineered (proprietary) Alpha Ceramic Alumina, (ACA) sub-micron abrasive technology.
• Removes down to P1000 grit sanding marks.
• Body shop safe – Fresh paint safe – Silicone free!
• Does NOT contain OSHA regulated Crystalline Silica! - HUMAN SAFE
• Water-based – No harsh solvents or foul odors!
• Wipes off easy! – Won’t clog buffing pads –– Competitive pricing.
• 3D’s Green Earth Technology – Biodegradable, Prop 65 and V.O.C. compliant

Bug remover is an enzyme based product that breaks down and loosens bugs splatters. If you live where you get a lot of bugs plastering the front of your vehicle,  3D Bug Remover is the right product for you. It is safe for the paint, plastics, and windows but works best when surface is cool. You can use a long handled brush with the Bug remover to scrub the bugs free of the grill of your vehicle, just be careful while scrubbing your paint as a brush on your paint could cause swirls.  You may want to pick up a few microfiber towels and Waterless carwash to assist with the task. The gallo is concentrated so make sure you dilute it 4 to 1 in a spray bo

Foam Cannon Pro and Foam Cannon S are new generation Foam Cannons, powered by MJJC’s new generation foam technology. This new technology is stronger and creates more, thicker foam with less soap, even with smaller pressure washers. They have a better connection system. This allows them to attach to your pressure washer easily, and makes changing attachments easier and faster.

Simply put, they are better, stronger, and save you soap, while creating more foam,  making it easier and quicker to foam your vehicle.

Please note regarding connectors.  If you have a short trigger gun, you will need to 1/4 quick release option from the drop down menu.
If you have a Kranzle Pressure washer, please check whether your connector is a D10 or D12 and select accordingly from the drop down menu.
If you have a Nilfisk domestic pressure washer (C/E/P series) you will either need the Gerni/New Nilfisk connector if your pressure washer was purchased within the last 2-3 years.  For older machines, please purchase the Nilfisk/Kew/Alto option.
If you have an AVA Pressure washer, unfortunately this item is NOT compatible with your pressure washer

Features

1. Larger Tank (approximately 1200ml) increases foam production.
2. Anti-leak Tank Cap allows you to foam chassis or roof without leaking.
3. Leak-proof stability is perfect for storing extra or leftover cleaning solution.
4. 360° Degree Adjustable Spray Direction feature makes it easier to foam the roof and chassis of your vehicle.
5. Better foam fan is produced with the new spray nozzle.
6. Thicker foam is produced using less shampoo(soap), which saves you money.
7. Produces 30% denser foam than the first generation foam cannon with the same amount of shampoo.
8. Thick foam can be produced even with 90Bar(1300psi) pressure washers.
9. New connection system (patent pending) makes it easier to attach fittings, no need for PTFE tape or glue.
10. New design makes it easier to change the orifice nozzle and mesh filter.

Description

• Is larger, more stable, and the leakproof tank cap allows you to better foam your vehicle’s chassis and roof, as well as store remaining  liquid without leaking.
• Is designed with the new generation MJJC foam cannon technology, allowing you to rotate the spray nozzle 360° degrees to foam your vehicle’s roof and chassis  easier without wasting foam.
• Produces 30% denser  foam than the classic foam cannon, while  using as little as 100ml of shampoo per 900ml water(1:9 ratio). That means you can create more foam while using less shampoo.
• Produces proper foam even with a 90Bar (1300psi) pressure washer. You won’t need to buy a larger pressure washing machine to produce a dense foam.
• Features the foam fan spray adjuster and top knob, making it easy-to-use!
• Available in a variety of adapters that fit most pressure washers. 
• Comes with a 1.25mm orifice nozzle installed and a 1.1mm orifice nozzle as a spare
• Designed with the new patented Click & Play connection system. Just screw it on, no need for extra PTFE tape or glue to seal your adapters.
• Built with new generation construction, making it stronger and more robust.
• Is newly designed, making it easier to change the orifice nozzle and stainless steel mesh filter.

Först Citrus Pre Cleaner / Pre Wash
The first choice for dirtier jobs.

If your car is really filthy or needs a bit of a spring clean, strip off heavier contamination with Först, our citrus Traffic Film Remover (TFR).

Natural orange oil within the formula doesn’t just boost cleaning – it smells great, as well.

How To Use Citrus Pre Cleaner / Pre Wash?

• Apply it neat to affected areas, leave it for a while to do its thing, then rinse off with your jet wash.
• It’s got more cleaning power than snow foam because there’s no aeration from the foam and it’s sprayed on at full strength using our effective litre spray bottle. Helping your citrus pre wash to be even across the car and not waste the citrus pre cleaner.
• Covering the whole car can waste product, so only spray it on the dirty areas (usually the lower half, and rear, of the car is enough).
• Great value for a litre, because we know you’ll be using this a lot – especially during the winter, enjoy our premium citrus pre wash today.

in2Detailing GEN 2 DA8 Dual Action Machine Polisher **Now Supplied with both 5 (125mm) and 3 (75mm) Backing Plates

Overview: 

Detailing Kingdom Next Cut 1.1 - 500ml/4 Litre
Detailing Kingdom Next Cut 1.1 has been designed from the ground up with the latest compound technology.  Next Cut 1.1 is a water based diminishing abrassive compound utilising a homogenous grain that has been specifically designed to be used on hard and soft clear coats.  It can eliminate deep scratches (P1500) and due to the diminishing abrassives, will also leave a high gloss finish.  To further enhance the finish we recommend following with Next Cut Finale.  
On softer paints where some users can experience 'stickiness' due to heat build up, we recommend spraying the pad with Detailing Kingdom Celebrate which will not only help to reduce the temperature but will also act as a lubricant.

Next Cut 1.1 has been designed to produce little to no dust and polish residue can be removed with absolute ease.  It really is quite a unique compound.

For an exhnaced finish as a one step compound on minor defects, Next Cut 1.1 can be combined with FDT or FDC.  For this, users would add 4 pea size drops of Next Cut 1.1 and 2-3 of FDT or FDC and polish as usual.  The finish will be extremely glossy and protected.

Next cut 1.1 contains no silicone or fillers and is bodyshop safe

Detailing Kingdom Next Cut Finale - 500ml/4 Litre
Detailing Kingdom Next Cut Finale is a water based diminishing abrassive anti-hologram polish.  Next Cut Finale can be used to further exhance the finish after polishing with Next Cut 1.1 or Next Cut 3.3.  Next Cut Finale can also be used to remove light defects such as 5000 grit sanding marks, fine microscratches, and swirl marks. 

Next Cut Finale has been designed to produce little to no dust and polish residue can be removed with absolute ease.

We recommend following Next Cut Finale with Detailing Kingdom FDT or FDC sealant to protect the finish and make it easier to clean.

Next Cut Finale contains no silicone or fillers and is bodyshop safe

Driveshaft Speed Sensor LDM-HALL-3/8”-24-NO-NP PN: 1523824

Beside incredible paint correction and polishing ability,3D SPEED leaves behind a layer of synthetic paint sealant blended with Montan Wax. AIOs are

3D SPEED-8oz/16oz/32oz/1G-All In One Scratch Remover/Swirl Correction+Polish+Wax

3D Speed - 16 oz - Detailed Image

DLAB 9032002121 High Speed Mini Centrifuge with A12-2P Aluminum

3D Shaker Mixer Blending - Mixing Attachments

This Time SSRK Has Come Up With 3D Crossings!

2D/3D Profile Sensor MLSL132

On Sale Homepage – in2Detailing

Printer fills niche for low-volume truck part

Excessive Entrained Air in an HPDC Shot Sleeve using Constant

Speedfloor Steel Joist System Features in Modular Home Design

R&D – 3D Shaker Tumbler Mixer

Document