Engrave your dream creations with our 100W CO2 Laser Engraver Cutting Machine. This laser engraving machine has an LCD display, red dot laser, and air assist.
SKU: USB-GR57-US
Important Resources and downloads:
Visit this machine in person: Book Here
Download the Manual
Download the RDworks software
NOTE: Does not include LightBurn Software
Replacement: Laser Tube, Power Supply, Mirrors, Lens
Convenient Size:
19.5” x 27.5” (500 x 700mm) engraving/cutting area
47” x 34” x 37” (119 x 86 x 91cm) overall dimensions (Length= 67 when include tube protector)
Net Weight 330.7 lb. (150 kg)
Tackle larger projects with ease
The detachable base allows you to transport the machine through smaller door frames.
Specs:
Recommended engraving speed: 100 - 500mm/s
Recommended cutting speed: 1 - 30mm/s (actual speed depends on material)
18mm Focal lens diameter
2 Focal length
25mm Mirror diameter
Resolution up to 2540 dpi
10” Standard Z-depth (Workspace height with honeycomb bed installed and laser head half retracted)
11” Max Z-depth (Workspace height with honeycomb bed removed, knife bed in use, and laser head fully retracted upwards)
Compatibility:
The Ruida control board works seamlessly with RDWorks for Windows PC (included) and LightBurn (not included)
RDWorks (included) and LightBurn (not included) are compatible with Windows 7, 8, 10 (64/32 bit), XP, 2000, and Vista.
The Ruida controller is compatible with macOS (Version 10.11 and higher) ONLY if you use LightBurn software (not included)
Photo-ready to convert images from HPLG, BMP, GIF, JPG, JPEG, DXF, DST, AI formats, and more into .RD files for laser processing.
4-Pin Port connection for rotary axis devices.
Power:
The integrated power supply features increased response speed, performance, and cutting power — it’s beaming with possibilities!
A secondary LCD display panel monitors the electric current and auto-judges fault, reducing potential damage to the laser tube and power supply.
Cut up to 10 mm (⅖″) thick acrylic/plexiglass
Uses standard 110V AC power connection
Laser Tube Lifetime:
100W CO2 laser tube with an estimated lifetime of up to 8,000 operation hours depending on power setting usage and water cooling performance
PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows:
Low Power 10–40% = 7,000–8,000 Hours
Moderate Power 40–70% = 5,000–6,500 Hours
High Power 70–100% = 3,000–4,000 Hours
Average Parameter Settings: Click Here
Cutting Edge Features:
HIGH LASER POWER: This laser engraving and cutting machine comes with a 100W CO2 laser tube to cut through thicker materials and engrave your designs faster, deeper, and clearer.
RUIDA DIGITAL CONTROLLER: The intuitive control panel with digital display allows adjustment of laser head positions and power dimensions, as well as document viewing and final image edits.
LINEAR RAIL GUIDING SYSTEM: Equipped with X and Y stepper motors for efficient power transmission between the guide rails with high precision and long service life.
VIEWING WINDOW: A transparent acrylic glass viewing window allows observation throughout the laser engraving process. Plus, it’s equipped with a sepia tint to protect your eyes from indirect laser beam exposure.
RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine’s path, and identifies positioning sizes, allowing an effortless project setup process.
ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to 1.75” or be fully retracted, allowing more control over different focal distance setups.
AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise.
TWO-WAY PASS-THROUGH: There’s always extra room! Equipped with 29W x 3.75H front and rear pass-through doors to accommodate materials larger than the table size.
BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine.
WATER COOLING SYSTEM: Pre-installed hoses along with the included water pump allow for a fast and easy setup. Only use with distilled water, ensuring it stays between 60–70°F (16–21°C).
WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube.
AUTOMATIC SHUTDOWN: The auto-shutdown safety feature stops the machine when opening the transparent window cover. Once closed, press the “Enter” button to continue operation.
Package Includes:
1 x Laser Engraver Machine
1 x Water Pump
1 x Ethernet to Ethernet Cable
1 x Grounding Wire
1 x Venting Exhaust Duct (4 ft. max. length)
2 x Water Hoses
1 x User Manual (English)
1 x USB Type-A to Type-A Cable
1 x USB Drive with Software
1 x Stainless Steel Clamp
10 x Allen Wrenches
1 x Double-sided Tape
1 x Power Cord
1 x Accessory Bag
2 x Keys
1 x Silicone Sealant
Warranty:
No need to worry! We offer a 2-year parts warranty on all machines.
1-year warranty on laser tubes and laser power supplies 80W and up
Certifications:
FDA Compliant
CE Certification
ISO9001 Quality Certification
One 45-minute Virtual Tech Support appointment with OMTech Specialists in Anaheim, California
Compatible Materials:
Laser Cutting:
Acrylic
*Wood
Leather
Plastics
Fabrics
MDF
Cardboard
Paper
Corian
Foam
Fiberglass
Rubber
Marking/Engraving:
Acrylic
Wood
Leather
Plastics
Fabrics
Glass
Rubber
Cork
Brick
Granite
Marble
Tile
River Rock
Bone
Melamine
Phenolic
*Aluminum
*Stainless Steel
*Titanium
*Cannot cut hardwoods like mahogany
*CO2 lasers only mark bare metals when anodized or treated.
Contact us with questions on specific materials not listed, we can process a sample for confirmation.
Some PVC-based acrylics can create toxic fumes when lasered.
100W CO2 Laser Engraver - Pay as Low as $156/mo. - OMTech – OMTech Laser
60W CO2 Laser Engraver - Pay as Low as $73/mo. - OMTech – OMTech Laser
130W CO2 Dual Laser Engraver - Pay as Low as $238/mo. - OMTech – OMTech Laser
Bring your ideas to life with OMTech's industrial laser engraver! This 100W CO2 laser engraver continues to uphold our high standards with its dual
OMTech 100W CO2 Laser Engraver with LightBurn, 20x28 Inch Laser Engraving Cutting Machine with 4 Way Pass Through Air Assist Water Pump Wheels
100W CO2 Laser Engraver - Pay as Low as $156/mo. - OMTech – OMTech Laser
OMTech 100W CO2 Laser Engraver, 20x28 Inch Laser Engraving Machine with 4 Way Pass Through Air Assist Water Pump Wheels, Industrial Laser Cutter Cutting Etching Machine for Wood Glass Acrylic More
100W CO2 Laser Engraver - Pay as Low as $117/mo. - OMTech – OMTech
Omtech 100w Co2 Laser Cutting / Engraving Machine - Basic Review and First Impression
OMTECH PRO 2440, 80W AND 100W CO2 Laser Engraver Cutting Machine – OMTech Laser
OMTech Co2 Laser Engraver Cutter 100W 28x20 Ruida Engraving Cutting Marking Machine
OMTECH PRO 2440, 80W AND 100W CO2 Laser Engraver Cutting Machine – OMTech Laser
OMTech Co2 Laser Engraver Cutter 100W 28x20 Ruida Engraving Cutting Marking Machine
OMTech MF2028-100 20x28 100W CO2 Laser Cutter Engraver with Basic Accessories C
OMTech 100W CO2 Laser Engraver, 20x28 Inch Laser Engraving Machine with 4 Way Pass Through Air Assist Water Pump Wheels, Industrial Laser Cutter Cutting Etching Machine for Wood Glass Acrylic More